
RHINO 344 WOES
![]() | bearlythere
Join Date: May 2007 Posts: 8 livingston, montana ![]() |
2007-05-17 142158
I noticed, while bleeding injector lines, that when one is cracked engine wants to die, but when other is cracked it doesn't seem to matter........does that sound like only one of them is firing?????
Reply to |


RHINO 344 WOES
![]() | bearlythere
Join Date: May 2007 Posts: 8 livingston, montana ![]() |
2007-05-19 142224
OK LET ME ASK A DIFFERENT WAY.........WHAT WOULD BE THE MOST LIKELY CAUSE OF ONE CYLINDER NOT FIRING LIKE OTHER ONE ....
Reply to |


RHINO 344 WOES
![]() | kwschumm
Join Date: Feb 2003 Posts: 5764 NW Oregon ![]() ![]() |
2007-05-19 142226
The cylinder needs air, compression and fuel delivered with the correct timing. It might be interesting to swap injectors and see if the problem changes. ....
Reply to |


RHINO 344 WOES
![]() | greg_g
Join Date: Jan 2004 Posts: 1816 Western Kentucky ![]() ![]() |
2007-05-19 142230
The one that changes the engine sound is the good one. The one that does not - replace it
//greg// ....
Reply to |


RHINO 344 WOES
![]() | bearlythere
Join Date: May 2007 Posts: 8 livingston, montana ![]() |
2007-05-19 142232
thanks.........good idea.........swapping them ought to tell me something.....probably end up replacing them ....
Reply to |


RHINO 344 WOES
![]() | bearlythere
Join Date: May 2007 Posts: 8 livingston, montana ![]() |
2007-05-27 142505
Well, I swapped places with the injectors and the problem didn't follow to the other cylinder, so I took a look at the glow plug and found the ceramic insulator cracked.....I will get that replaced and see what happens. Thanks for the help!! ....
Reply to |


RHINO 344 WOES
![]() | Ozzy1993
Join Date: Apr 2015 Posts: 4 Texas ![]() |
2015-04-20 192610
What happened with injector problem. I have same thing happening ....
Reply to |


RHINO 344 WOES
![]() | Carolinablue
Join Date: Feb 2015 Posts: 28 NC ![]() |
2015-04-20 192611
Don't take this to the bank, but it may be kinda like on a gas engine. You can pull certain spark plug wires and the engine still will idle smoothly, while another will make it skip. I think it's just a matter of the timing of the engine and really no problem at all. ....
Reply to |


RHINO 344 WOES
![]() | kthompson
Join Date: Oct 2005 Posts: 5278 South Carolina ![]() ![]() |
2015-04-20 192612
Ozzy, please realize this thread is almost 8 years old. ....
Reply to |


RHINO 344 WOES
![]() | Ozzy1993
Join Date: Apr 2015 Posts: 4 Texas ![]() |
2015-04-20 192614
Yes I know I was just hoping you would respond. Lol. Mine is lacking power and I creaked the nut on that injector and it did not change a thing. Not much pressure coming out of that side of pump. Can't really find a model on pump or break down on it to dig deaper ....
Reply to |


RHINO 344 WOES
![]() | popcornfart
Join Date: Jul 2014 Posts: 11 Chandler, Texas ![]() |
2015-04-20 192618
Have you checked your valve setting on the bad cyl. ? or both cyls. intake & exhaust valves
you cold have one or both out of adjustment
does it have a compression release it could be hung on one
cyl. but you should hear it, the exhaust would sound funny ....
Reply to |


RHINO 344 WOES
![]() | Ozzy1993
Join Date: Apr 2015 Posts: 4 Texas ![]() |
2015-04-20 192619
I'm going to check that. Farm boys has manuals for 55.00im going to get them. It can't hurt ....
Reply to |




Share This