Go Bottom Go Bottom

JD Banner Ad

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-24          129769

Was watching the JD banner ad with their tractor. Amazing.

But for you guys witha MMM, is that how you get it under the tractor? I thought it was a little harder than that. LOL

It really is a good ad.

GD, GB


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
yooperpete
Join Date: Jan 2004
Posts: 1413 Northern Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-24          129771

I've been watching the JD ad for some time now and am amazed how JD does a Michael Jackson "kinda" backstep to get the rear attachment connected without reverse tire rotation.

Yes, you can drive over your MMM to get it attached. That, however, defeats anything that I've ever been taught. I tip the bucket on the loader, raise the front tires off the ground, set the gage wheels so the deck will roll as swivels and slide it sideways through to hookup. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-24          129772

A neighbour of mine has a MMM on his machine, he uses the "DRankin school of physics" (see his picture # 2) way of mounting or removing it. LOL.

He uses a 3PTH ballast box when doing FEL work, and the FEL as ballast for 3PTH implements.

For mounting or unmounting the MMM, he merely sets the 3PTH ballast box down, then turns around, and tries to lift it with the FEL, this lifts the rear wheels in the air. He slides the MMM underneath with a pole, then lowers the tractor back down over it and hooks it up.

It looks pretty scary, but he claims it's the easiest way he's found to do it.

Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-24          129787

Yooperpete and Murf,

Can we video tape those hookup? One thing this has convinced me of, I really like my RFM. LOL
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
DRankin
Join Date: Jan 2000
Posts: 5116 Northern Nevada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-25          129809

Makes perfect sense to me.

Pick up the tractor, kick the mower deck under it with your toe, put the tractor down.

Maybe its better I bought a rear mower deck after all.
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
Iowafun
Join Date: Jul 2004
Posts: 955 Central Iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-25          129829

I would feel really weird driving over my MMM. I set the wheels on it to move it sideways, then I usually have to use a jack to lift the front end up to slide it under. It's so close, but no cigar without lifting it up. I've used the loader too, but it's usually off when I'm monkeying with the MMM. I like to mow without the MMM so I don't hit the house, fences, etc. I've done that before.

The MMM isn't bad to take on and off. I just wouldn't want to do it every week. Some work on Deere's part in changing the design would make it even better. Like I said, it's so close to being very easy. But they missed in a few spots and that makes all the difference in the world. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-25          129836

"I like to mow without the MMM so I don't hit the house, fences, etc. I've done that before."

I've tried that before, but it doesn't cut very well.

I would think taking the FEL of instead would be a better choice!!!

ROFLMAO...... ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-25          129843

Thank you Murf,

Since I don't have a MMM or FEL I hated to say anything but I really wondered myself. Like I keep saying the best comedy on the internet, and some of the best people too.

GD, GB



....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
SG8NUC
Join Date: Jan 2006
Posts: 579 g
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-25          129850

Iowafun

It was just the slip of the fingers I understand. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD Banner Ad

View my Photos
Iowafun
Join Date: Jul 2004
Posts: 955 Central Iowa
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-05-26          129905

Whoops! My excuse is I had just gotten the kid to bed after a long day at work and the day before I had driven back from Michigan. So basically, I was still fried. I took today off to help recover.

I like to mow without the FEL is what I meant to say. I have tried mowing without the MMM and as Murf said, it doesn't work too well. It also doesn't impress the wife. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login