Loader Buddy: Loaders Back Hoes  -- General Tractor Discussions Discussion Forum and Review Loader Buddy: Loaders Back Hoes -- General Tractor Discussions Discussion Forum

  parts   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index


New As Posted | Active Subjects



Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Loaders Back Hoes Forum

Page [ 1 ] | 2 | 3 | 4 | | Next >>
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 03-12-2010, 18:47 Post: 169153
kubman



Join Date: Mar 2010
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 23

15
Filter by User
 Loader Buddy

I have read some posts on another tractor site about "Loader Buddy", Does anyone have any info or experience with this attachment?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-12-2010, 19:04 Post: 169154
kwschumm



View my Photos

View my Photos  Pics
Join Date: Feb 2003
Location: NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5764

2
Filter by User
 Loader Buddy

Seems to me it won't pick stuff up as well as a grapple or scoop as well as a bucket. Like most all-in-one products it looks like it does a little of everything but none of it as well as a tool dedicated to a job. Here's a link if you haven't seen one.






Link:   Loader Buddy 

Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-12-2010, 21:14 Post: 169155
kubman



Join Date: Mar 2010
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 23

15
Filter by User
 Loader Buddy

Thank you for the link. It sure looks like it would be a handy tool. I'll have to do some more research.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-12-2010, 22:40 Post: 169157
auerbach



View my Photos

View my Photos  Pics
Join Date: Sep 2007
Location: West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 2168
 Loader Buddy

I'm not sure how much better it would work than a standard bucket on which you attached some extensions on the floor.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-13-2010, 01:13 Post: 169160
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853

13
Filter by User
 Loader Buddy

I made something like this for my medium-size backhoe loader which was 60" wide and had 3' sticking out from the leading edge. 18" was under the bucket. It looked like a grate; a piece of 1/2" x 4" x 1-1/2" x 60" angle welded to the grate crosswise to the 1"sq bar stock teeth fit over the cutting edge. A 1/4" x 6" x 60" strip welded along the rear of the teeth bolted to the rear underside of the bucket.

I went from a 7/8 yard struck capacity to 4-5 yds of hand piled-on brush, or 2-3 yds construction debris depending on what it was.

The only downfall was unlike the Loader Buddy, my bucket was not relieved on the sides to allow for more capacity and leverage (which translates into lifting ability) and longer items. A top single arm grapple would have been the cat's meow, but I sold the machine and bought a skid steer with an industrial grapple bucket with even more bucket side relief--and capacity upped to as much as 5 yds of non-hand piled brush---even an ocassional scrap car. But all this added capacity comes at a cost both dollars and weight--$5,200 for the bucket and cuts 800 lb. off the 5200 tipping capacity. Even still, the skidsteer is much more capable the backhoe loader any day by threefold.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-13-2010, 08:42 Post: 169164
kubman



Join Date: Mar 2010
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 23

15
Filter by User
 Loader Buddy

Earthwrks, was this similar to a tooth-bar and did you make this solely to increase the capacity of your bucket?, or to help dig also?






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-13-2010, 08:59 Post: 169165
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853

13
Filter by User
 Loader Buddy

Not like a tooth bar in that the teeth or bar bolt to the leading edge of the bucket; mine went on like stepping into some bathroom slippers (tired now and can't think how to phrase it better). Once on the bucket, and with the loader raised then I would install 6 1/2" bolts along the back bottom to secure it to the bucket--the angle iron along the front edge of the bucket kept it from moving up/down and back, the bolts prevented dropping down allowing it to come off. I made it strictly for picking large loose loads which was my main business 11 years ago--like constructiion debris, tree branches, stumps, fire wood, metal scrap, cement chunks, etc. On ocassion I had to back drag where I picked up debris but it put tremendous stress on the bucket bottom pulling all 6 bolts one at a time through 3/8" plate leaving "bullet holes" in the bucket. Eventually I used 30,000 lb. ratchet straps to hold it wrapped backover the back of the bucket---this allowed some springiness when I put too much down pressure on it.

Not practical for digging at all, plus the tremendous leverage on the bucket cylinder just wasn't a good idea.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-13-2010, 09:07 Post: 169166
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853

13
Filter by User
 Loader Buddy

Take a look at manure forks or buckets--these have round bars that are widely spaced--mine were 1" sq bars with a chisel edge (note the loader buddy has the chisel the wrong way which just ride up over stuff). My teethe were spaced about 4-1/2" for strength (in numbers) and had welded 1/4" x 2" x 4-1/2" plates tipped backward between teeth to keep them from bending, and the helped prevent submarining of the teeth in loose soil. The whole assembly weighed about 300 lb.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-13-2010, 10:17 Post: 169167
kubman



Join Date: Mar 2010
Location:
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 23

15
Filter by User
 Loader Buddy

Why do you say the wrong way? Wouldn't the way loader buddy has the chisels prevent the submarining in the loose soil you talk about? The web site says it is good for handling logs too, maybe this keeps the picking up of excess dirt to a minimum.??






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 03-13-2010, 11:35 Post: 169169
earthwrks

TP Contributor

View my Photos

View my Photos  Pics
Join Date: Dec 2003
Location: Home Office in Flat Rock, Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 3853

13
Filter by User
 Loader Buddy

I say wrong way because, yes it helps prevent submarining BUT also prevents picking up stuff unless you drastically tip the bucket forward which is counterproductive---think of the purpose of a tooth bar and the tooth orientation for. Not necessarily digging but getting under things to get a bite.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] | 2 | 3 | 4 | | Next >>

Discussion Boards > Active Subjects > Messages as Posted > Loaders Back Hoes Forum

Thread 169153 Filter by Poster:
auerbach 1 | earthwrks 13 | harvey 1 | kubman 15 | kwschumm 2 | Murf 3 |



SEARCH


 (Advanced Search)

Picture of the Day
crunch

Home Improvement - How do you know if you need a New Roof
How do you know if you need a New Roof


Recent Posts without Replies
   Massey 261 transmission troubl
   New Holland 1290 tractor price
   2005 MF 431 2WD orbital valve
   Who Makes most Front Snowblowe
   Anyone have a John Deere 2025
   How big is Enough LED Dash Inf
   Who Makes Most Front Snowblowe
Recent Topics with Activity
   TC40D wants to keep moving
   Cub Cadet 6284 with Westendorf
   Angle Shutoff Valve Failure in
   John Deere vs Kubota or other


Featured Suppliers

Mountain Creek Labradoodles
      MountainCreekLabradoodles.com





New Forums on Gun Sport Shooting and Hunting -- BarrelPoint.com  New Forums on Horses ManePoint.com
Talk Horses at ManePoint
Hunting + Gun Sports at BarrelPoint



Most Viewed

+ 7108 Loader
+ Problem Connecting Hydraulic Hoses
+ Woods 9000 sub-frame backhoe
+ Backhoe Hydraulic Hose Line Set up
+ Front End Loader for Honda 5518 Multi-Purpose Trac
+ Kit Built Backhoe Review Advice
+ Great Bend Loader
+ Best way to free a seized pivot bolt joint
+ small backhoe bucket
+ Cylinder seal replacement

Most Discussion

+ Backhoes and breaking frames
+ Backhoe Hydraulic Hose Line Se
+ Back hoe on a sub-compact
+ Best way to free a seized pivo
+ I am frustrated with my loader
+ Loader Buddy
+ JD 48 Dipper cylinder
+ THUMB SIZE
+ TC33D New Holland breaking in
+ CADDigger 608 Building Experie

Newest Topics

+ Komatsu WB140 F
+ LA301 leak down
+ Kubota BH7600 backhoe parts needed
+ Front end loader hydraulic issue any help
+ Best o-rings for hydraulic quick connects
+ Kubota B6200HST Compatible Loader
+ Hydraulic Gremlins
+ Update - Backhoe Attachment
+ 14 LA Loader
+ 14 LA Loader