
thinking of buying a 4210
![]() | eddiep
Join Date: Jun 2006 Posts: 3 miami ![]() |
2006-06-15 130910
i am thinking of buying a 4210 used 950 hrs 3yrs old any negative comments or something i should be concerned with. please comment i have been a little leary of john deere since the homedepot sellout and the recall on my generator and irrigation john deere which were purchased new. thanks
Reply to |


thinking of buying a 4210
![]() | kwschumm
Join Date: Feb 2003 Posts: 5764 NW Oregon ![]() ![]() |
2006-06-15 130921
My 4310 has been very reliable. It's the same machine with a little bigger engine. Weak points? Open the hood and look for corrosion around the battery, radiator and oil cooler where battery outgassing occurs. The 4210 is sometimes considered a little underpowered for it's frame size but it can do a lot of work. ....
Reply to |


thinking of buying a 4210
![]() | Iowafun
Join Date: Jul 2004 Posts: 955 Central Iowa ![]() ![]() |
2006-06-18 130985
I also have a 4310. Great tractor. The frame size provides lots of use options. Just be aware of the power limitations and do't bite off more than you can chew. You should be surprised with how much it can do. ....
Reply to |


thinking of buying a 4210
![]() | SeonSr
Join Date: Mar 2006 Posts: 7 San Andreas, CA ![]() |
2006-06-19 131047
I bought my 4210 over three years ago and it does everything I needed it to do. I have a FEL and a box scraper. I just installed a Taylor Way 766 backhoe on it but really haven't had a chance to really dig with it, but I'm sure it'll be better than digging by hand with a shovel ;-) . ....
Reply to |


thinking of buying a 4210
![]() | MiikeJD
Join Date: Nov 2003 Posts: 25 Southern Illinois ![]() |
2006-06-20 131059
I have a 4210 and never had any problems. I have a FEL and a 6' mid mount mower. It has been used on my 5 acre lot. Used for landscaping and mowing around my new home. Has never failed to perform anything that I have wanted it to do. It is a sync shift 4 wheel drive. Good luck with your purchase. ....
Reply to |


thinking of buying a 4210
![]() | Chief
Join Date: Jul 2003 Posts: 4299 Southwest MiddleTennessee ![]() ![]() |
2006-06-20 131083
I have about 300 hours on my 4410 and it has been a great machine. Only problem was with the battery outgassing and causing corrosion as stated above and I have now fixed the problem with a sealed battery. ....
Reply to |




Share This