Go Bottom Go Bottom

John Deere 955 3 Points Arms Slow Going Down

View my Photos
brianlyons
Join Date: Jan 2008
Posts: 6 SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-01-07          150019

I need some help! I just bought a used JD 955 and the 3 point lift arms go down very very slowly. I turned the round black control valve that's by my left foot. I think I may had turned it to much. How many times will it turn?
All help is very appreciated. Thanks in advance!!


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
DennisCTB
Join Date: Nov 1998
Posts: 2709 NorthWest NJ
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-07          150020

Is there any weight on the hitch?
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
brianlyons
Join Date: Jan 2008
Posts: 6 SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-01-07          150021

Yes 5' Box Blade ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
DennisCTB
Join Date: Nov 1998
Posts: 2709 NorthWest NJ
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-07          150022

I have a Kubota but all of these work pretty much the same. The knob when closed will stop the implement from descending. Opening the valve will allow th implement to fall, speed regulated by how far open the valve is. I often adjust the speed of descent by turning the valve with one hand while I move the hitch lever with the other so I can drop the implement at the correct speed for the weight.

Are you saying that is what you are doing and it does not want to fall as quick as you want?. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
Hettric
Join Date: Mar 2004
Posts: 133 MA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-01-07          150029

I have a 755, the manual covers 755,855,955.
From what you said about the knob by your left foot,(in the center?) that knob/crank is for the mower deck. I have not used this yet so can't give you a run down on it's operation. The control knob/valve for the 3pt is under the seat on drivers left side. Operates as explained above.If you need something out of the operators or shop manual, just ask.
Good luck ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
candoarms
Join Date: Mar 2007
Posts: 1932 North Dakota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-08          150032

Hettric,

The knob between the operator's feet controls something on the mower deck?

Now you've got me wondering......

Interesting that the 3-point drop rate has to be made under the seat. Seems very inconvenient to me.

Oh well......I learn something new every day at this place, which is why I enjoy the company so much.

Many thanks.

Joel ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
jbjpam
Join Date: Jun 2007
Posts: 39 Mid Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-08          150045

Hettric is correct. The dial on the floor board is to adjust the cutting height of the mid mower or to hold it completely up when you just want to raise and lower the 3 point.
The dial under the seat is to control the rate of drop.
If it still drops slow you may want to change out the hydraulic filter. That has been a problem on my old 755 in the past. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-08          150055

Quote:
Originally Posted by candoarms | view 150032
Hettric,The knob between the operator's feet controls something on the mower deck?Now you've got me wondering......Interesting that the 3-point drop rate has to be made under the seat.Seems very inconvenient to me.Oh well......I learn something new every day at this place, which is why I enjoy the company so much.Many thanks.Joel


Well, it's not really *under* the seat, more like it's behind the operators legs. I thought most of them were there. Not too inconvenient, it would be a lot worse if you had to get out of the seat and walk to the rear of the tractor to adjust.
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
jbjpam
Join Date: Jun 2007
Posts: 39 Mid Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-08          150057

Actually it is under the seat. You have to lift the seat to adjust it. On my 4210 it is between the legs in front of the seat. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
kwschumm
Join Date: Feb 2003
Posts: 5764 NW Oregon
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-08          150058

Quote:
Originally Posted by jbjpam | view 150057
Actually it is under the seat. You have to lift the seat to adjust it. On my 4210 it is between the legs in front of the seat.


Really? Wow, that is inconvenient :) ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
DennisCTB
Join Date: Nov 1998
Posts: 2709 NorthWest NJ
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-01-08          150059

Quote:
Originally Posted by jbjpam | view 150057
Actually it is under the seat. You have to lift the seat to adjust it.


I suppose that is supposed to be a safety feature so that you don't inadvertently rub the knob somehow and amputate someones foot by dropping a blade suddenly. Interesting. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 955 3 Points Arms Slow Going Down

View my Photos
brianlyons
Join Date: Jan 2008
Posts: 6 SC
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-01-08          150061

Now that the operating temp is cool is lowers at normal speed. So it go slow after running the unit for a while.
I was doing some heavy box blading in high range.
That's the resy of the story. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login