Go Bottomsnow blower hydraulics problem
 | Sal
Join Date: Posts: 1 
|
2006-01-26 123579
I am having a problem raising and lowering the hydraulics on the 50 inch snow blower attached to a model BX2200 Kubota tractor.
If I bleed the lines, the hydraulic cylinder moves ok about 5 times and then it stops. Sometimes it lowers to the point that the front wheels lift off the ground, and it will not go back up!
Any ideas?
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
 | DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada 
 Pics
|
2006-01-27 123593
Most problems like that seem to come from the quick-connects not being seated properly or coming unscrewed.
I'll bet the problem started when you took off the FEL and hooked up the blower. ....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
 | Murf
Join Date: Dec 1999 Posts: 7252 Toronto Area, Ontario, Canada
Pics
|
2006-01-27 123596
"Sometimes it lowers to the point that the front wheels lift off the ground, and it will not go back up!"
Sure sounds like the pressure is leaking past the valve somewhere and pressurizing the system from the one side.
As Mark stated, check the connections too.
Best of luck. ....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
Pics
|
2006-01-27 123598
It also sounds like the valve has difficulty in the float position and it needs the kit to keep the balls in place in the control valve. I don't feel that the hydraulic line connections are the problem. ....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
 | cutter
Join Date: Feb 2000 Posts: 1309 The South Shore of Lake Ontario, New York 
Pics
|
2006-01-27 123620
Art, Happy Friday! How is that modified golf cart working out?
....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
| Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
Pics
|
2006-01-27 123630
It's parked right now as the snow slows it down to much so the sled is ready. I've got another project in the garage as I bought a kit car and I'm repowering it. ....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
| cutter
Join Date: Feb 2000 Posts: 1309 The South Shore of Lake Ontario, New York
Pics
|
2006-01-27 123631
A kit car? Not an Austin Healy 3000 or a Cobra is it? ....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
| Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
Pics
|
2006-01-27 123636
It's a 365gtc spyder from what I can find but it's the miami vice car in red. ....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
| cutter
Join Date: Feb 2000 Posts: 1309 The South Shore of Lake Ontario, New York
Pics
|
2006-01-27 123650
Holy quad exhaust Batman, a cross between a Jaguar, AH Sprite and Corvette. Nice lines, collectible name and plenty of weather stripping and chrome to detail. What a great looking car! Did you get the V-12 with it or just the frame and body?
I could be mistaken but the Miami Vice car was a Testarossa. I remember those big mirrors on the front posts you had to have because rear visibility was nonexistent.
Where do you find the time??? ....
Reply to |
Quote Reply |
Add Photosnow blower hydraulics problem
| Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
Pics
|
2006-01-27 123654
No the original two seat roadster was a Mcbirne replicar body and a corvette chassis. I believe this one is the same body just a tube chassis. It was a complete running car from ebay^#!@. The testarossa two of them was a freebie from Italy to get this style car off the show. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This