Go BottomJinma 284
 | Cribbits
Join Date: Posts: 1 
|
2004-04-21 83884
I have a Jinma 284 with a FEL. When I use the loader it steers hard is this normal? I just received the tractor.
Reply to |
Quote Reply |
Add PhotoJinma 284
| TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley 
|
2004-04-22 83913
Tractors without PS steer hard when a loader is mounted--more so with a load. I have old style power-assisted steering and it still steers pretty hard.
It's likely normal for the tractor and some weight on the 3ph is needed. I usually leave my box scraper or other heavy implement on the 3ph to improve the balance and lighten the steering. Other people find they need a ballast box. ....
Reply to |
Quote Reply |
Add PhotoJinma 284
| Cribbits
Join Date: Posts: 1
|
2004-04-22 83931
I have power steering, I just loose steering assist when I use the loader Hydraulics. ....
Reply to |
Quote Reply |
Add PhotoJinma 284
 | DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada
 Pics
|
2004-04-22 83933
The extra weight on the front end created by a full bucket will make the P/S work harder, especially if you have R-4 or turfs up front.
All three tractors I have owned have steered hard with max loads in the bucket, except when I was running Ag tires. ....
Reply to |
Quote Reply |
Add PhotoJinma 284
| Cribbits
Join Date: Posts: 1
|
2004-04-22 83938
I have no weight in the bucket. I loose steering hydraulic assist when I use the loader hydraulics. ....
Reply to |
Quote Reply |
Add PhotoJinma 284
 | kwschumm
Join Date: Feb 2003 Posts: 5764 NW Oregon
Pics
|
2004-04-22 83939
That's why many tractors now use dual pumps for PS and hydraulics. With a single pump the hydraulics steal from the PS. ....
Reply to |
Quote Reply |
Add PhotoJinma 284
| Cribbits
Join Date: Posts: 1
|
2004-04-22 83950
Is their any way to make the steering take priority over the loader so you always have steering assist? ....
Reply to |
Quote Reply |
Add PhotoJinma 284
| edward_dugas
Join Date: Nov 2003 Posts: 24 ohio
|
2004-04-22 83959
Recommend that you go to the NYCTO association board and review the latest posts there re: the steering and the loader problem as discussed by a loader manufacturer. Your problem can be fixed. The 300 series Jinmas have one pump for the power steering and another for the hydraulics. Do not place counter-balance on the 3pt till the problem is fixed as this will further the load on the hydraulic pump. Have fun. ....
Reply to |
Quote Reply |
Add PhotoJinma 284
| Cribbits
Join Date: Posts: 1
|
2004-04-22 84002
Do you have a link to NYTCO? ....
Reply to |
Quote Reply |
Add PhotoJinma 284
| edward_dugas
Join Date: Nov 2003 Posts: 24 ohio
|
2004-04-22 84007
should find them at:http://nortrac.proboards26.com/index.cgi
good luck ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This