Go BottomKioti 1924 dip stick markings
 | BOBBYboy
Join Date: Aug 2015 Posts: 23 weaverville nc 
|
2015-12-09 194176
On my kioti 1924 dip stick looks like someone took a file to it. The manual said to fill it to the area between the two marks on end of the stick.On my stick I SEE To marks I believe ,they are 3/8 of an inch from the bottom plus another mark 1/4 of an inch above the 3/8 mark,but then I have a mark about 1 inch above that.Could someone tell me if these marks are right and if the oil level should be about a 1/2 from the end of the dip stick. I'm not capable to take and post pictures,but a picture of a dip stick with the marks would ease my mine thanks
Reply to |
Quote Reply |
Add PhotoKioti 1924 dip stick markings
 | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto 
 Pics
|
2015-12-10 194178
That sure sounds strange but you could drain the oil and refill with the exact amount that the manual calls for, and see where the level is on the stick. ....
Reply to |
Quote Reply |
Add PhotoKioti 1924 dip stick markings
 | kthompson
Join Date: Oct 2005 Posts: 5278 South Carolina
Pics
|
2015-12-10 194179
I worked for heavy equipment mfg few years back. You post reminded me of a dipstick we made which was 1/4 inch keystock welded in 1/2 pipe cape. The markings were made with cut of band saw blade.
Have you tried looking on line at pictures of the parts to see if they show the dip stick in any detail? ....
Reply to |
Quote Reply |
Add PhotoKioti 1924 dip stick markings
| BOBBYboy
Join Date: Aug 2015 Posts: 23 weaverville nc
|
2015-12-12 194181
auerbach, thanks for the words of wisdom.the simply solution are the hardest to see.so I drain the oil and put my 3.6qts in .so now I see the right reading on the stick.Funny thing is while doing this I find a sticker on the under side of the hood cover and it said the tractor should take 4.3qts. so I'm thinking??replacement parts from a different model?? ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This