tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors,  Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images
  parts   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up

Forums > Active Threads > Other Tractor Brands > Mitsubishi

Post Message Mitsubishi

 Go Bottom
____________________________________________________________________________________
Transmission Hydraulic oil level D2650FD

View my Photos
kwindle
Join Date: Mar 2009
Posts: 6 Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2009-12-07          167298


Which plug is used to determine the fill level on this model? There are several plugs on the side that look like logical choices, but the service manual I have is not clear. There is no dipstick on the fill cap...should there be? Thanks in advance.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


____________________________________________________________________________________
Transmission Hydraulic oil level D2650FD

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2009-12-08          167318


Don't know, but generally, the correct level is not as specific as for engine oil because it depends on the position of the cylinders, what the pump's doing, what check-valves there are, etc.

If you can see gears through the opening, it should be the right one. As for the level, you need "headspace" above it for expansion, esp in the summer, and the most upper gear should be at least partly bathed. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


____________________________________________________________________________________
Transmission Hydraulic oil level D2650FD

View my Photos
sharkblood
Join Date: Mar 2015
Posts: 6 Romania
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-03-18          192385


I have the same question, the dipstick was cut so I don't know how to figure this out.
There is a large bolt on the right side, bu that one seems to be too low. There are also two plastic plugs on the right and left side, on the upper part of the transmission. This seem to me to be too high.

So... question remains unanswered :).

I own a D2350FD, which is similar to D1650 , D2050 , D1850 ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


____________________________________________________________________________________
Transmission Hydraulic oil level D2650FD

View my Photos
Murf
Join Date: Dec 1999
Posts: 7147 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2015-03-18          192386


On most tractors there's a sight glass, a little clear panel, usually on the rear-facing portion of the rear end. It may be covered with so much dirt you can't see it at just a glance.

The transmission, rear end and hydraulic reservoir are all one common section.

Generally with the tractor parked on a level surface, with the FEL down if it has one, the oil should be in the middle of the sight glass unless there's upper and lower limits shown on the glass.


Best of luck. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


____________________________________________________________________________________
Transmission Hydraulic oil level D2650FD

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1049 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2015-03-18          192388


There is a plug on the right side toward the front at about the same level as the rear axle. This would be the fill level. The 2 plastic plugs are probably to keep the threads clean for future use. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


____________________________________________________________________________________
Transmission Hydraulic oil level D2650FD

View my Photos
sharkblood
Join Date: Mar 2015
Posts: 6 Romania
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2015-03-18          192390


Thanks, I'll check it out in the WE.

I have to mention there's no thread in the holes covered by the two plastic caps.
There are threaded holes in some other areas, these are covered by rubber caps.

And... one of the plastic caps is missing on my tractor so it was leaking some oil while running. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Return to index    Go Top


Share This



Tractorpoint Parts
Fast Delivery!
Low Prices
Tractor Starter Motors for sale
Starter Motors