Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

On my Mitsubishi FD2650, the mesh filter can be accessed through a twist off plug on top of the transmission housing. There are two twist off plugs...it's the one on the left side (if you're sitting on the tractor). Unscrew this cap, pull out the filter, clean, and replace. It's about 10-12" long.

hydraulic filter placement
Mitsubishi
Replies 3 Post by kwindle

Thanks for all the replies. Hopefully within a week or two, I'll have time to tear into it and give these suggestions a try.

Mitsubishi FD2650 FEL
Mitsubishi
Replies 8 Post by kwindle

Which plug is used to determine the fill level on this model? There are several plugs on the side that look like logical choices, but the service manual I have is not clear. There is no dipstick on the fill cap...should there be? Thanks in advance.

Transmission Hydraulic oil level D2650FD
Mitsubishi
Replies 6 Post by kwindle

Recently replaced the rear wheel seals on my Mitsubishi 2650FD. What lubricant should be used to refill the resevoirs? I would assume 85w gear oil but the fluid that came out appeared thicker?

Recommended lubricant for rear wheel bearings
Mitsubishi
Replies 2 Post by kwindle