Snow sticking to bucket
peterR
Join Date: Jul 2003 Posts: 11 western CT |
2003-12-07 70465
What can I use to stop snow sticking to front bucket. Has anyone tried oil or wax or anything else that can be put on when cold outside
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
harvey
Join Date: Sep 2000 Posts: 1550 Moravia, NY Pics |
2003-12-07 70473
PeterI'll take a stab at it. #1 is your tractor stored indoors warm and toasty? If so when you move it outside come back in and get dressed for the weather give the bucket time to cool down. #2 If you store outdoors and your bucket is cold if you get down close to the ground the warmer snow is going to freeze to the bucket.
I've heard of guys stealing the wifes PAM to spray their buckets me thinks it might work but seems like it would get real expensive. You might even try rain X or silicon spray.
Also try banging the bucket when you empty at the bottom of the curl ussually if you rattle it a few times snow will break loose.
When parking put your bucket in the dump position and let the buchet rest on the cutting edge. I try and keep mine in the dump position most of the time when outside waiting for temps to adjust.
I know some days its worse than others for sticking but mostly I believe its difference in air temps and snow temps.
Mine is parked inside by the wood stove so I do have some problems with it now and again. ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
Dirtpoor
Join Date: Sep 2003 Posts: 6 Virginia |
2003-12-07 70479
Around here a lot of people keep a sprayer with diesel fuel in it to spray a coat on the inside of the bucket before moving snow.Of course this probaly isn't the best for the environment and I'm not recomending you try it.. but it does seem to work. ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
kubotaguy
Join Date: Nov 2003 Posts: 360 Shepherdstown, WV |
2003-12-07 70489
I keep my machine in an outside shed and back it out while it is warming up. Then I put up the folding ROPS, hook up the box blade, then go back inside for a few minutes. This allows the hydraulic fluid to warm up as well as let the bucket adjust to the outside temp. I haven't had any problems with snow sticking to my bucket. I will probably keep the inside of my bucket coated with this waterless carwash stuff I bought over the net as it seems to work real well with the cars as far as keeping them protected. It is on the expensive side, but it has wax in it and I don't have to deal with water in the winter time. ....
Link: waterless carwash
 
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
JAZAK5
Join Date: Jul 2003 Posts: 276 coxsackie,ny |
2003-12-07 70500
I use salad oil in a 2 gal poly sprayer and when I have time coat the bucket with a heavy COAT of car wax. made nice blocks of snow for the kids snow fort with the bucket !!!! Wax works great for the box blade too/pusher. ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2003-12-08 70517
Somebody a long time back talked about a spray used for blower chutes as well as loaders. I can't remember what it but not something found in a kitchen I think. I forgot about it since it's not enough of a problem to cause me to look for a solution. I do have a special broom though. One end is for clearing the blower chute and the other is for getting snow out of and off everything before I put the tractor away. The broom is special because I used it for spreading pea-gravel over tar. It's now retired and banished from everywhere except the tractor shed. ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
unit5alive
Join Date: Jul 2003 Posts: 250 Latrobe Pa |
2003-12-08 70518
Try getting a bar of candle wax from craft store, rub bar on inside bucket until coated good ,then heat lightly with heat gun or torch to flow wax ,you wont believe how this works! ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
Peters
Join Date: Feb 2002 Posts: 3034 Northern AL Pics |
2003-12-08 70523
You can buy mold release spray which is used in the plastic industry. I am not sure what the price will be? ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
Chief
Join Date: Jul 2003 Posts: 4299 Southwest MiddleTennessee Pics |
2003-12-08 70532
Try spraying the inside of the bucket with 3M Solid Film Lubricant. It needs 24 hrs. to cure but holds up well and is pretty much impervious to anything sticking to it. ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
Tazbota
Join Date: Posts: 1 |
2003-12-13 71100
I use 99% pure spray silicone spray (Food Grade. I purchase it at the local hardware store for about $6 per can. Make sure to get "Food Grade" silicone as it has a higher % of silicone. Iusually spray 3-4 times per winter. The key is to spray on a heavy coat and allow it to dry throughly. DO NOT wait until it's time to plow to spray the bucket.
....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan Pics |
2003-12-14 71159
I plow snow commercially here in Michigan. Diesel fuel and silicone both absorb water especially silicone which freezes. I coat my plows with axle lubricant more or less to prevent salt from attacking the parts. Tractor Supply has something called "graphite lubricant" in aerosol (about $6) . The mfg. claims it is good for coating mower underbellies and snow plows. Haven't tried it as the sheer friction of continuous snow and ice keeps anything from sticking long. ....
Reply to | Quote Reply | Add Photo
Snow sticking to bucket
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2003-12-15 71205
If you don't mind the mess try 5th lubricant, that stuff will stick to anything and won't come off even if you want it to. If it will stay in place under a loaded semi-trailer it's got to have some serious stickum......
Best of luck. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This