Recall on JD WEB site
cef2lion
Join Date: Jul 2003 Posts: 41 PA |
2003-12-22 71933
I saw this on the JD WEB today. It wasn't dated so I don't know how long it has been there.
http://www.deere.com/en_US/newsroom/2003/releases/common/031219_tractorrecall.html
IMPORTANT SAFETY NOTICE
Dear John Deere Customer:
In voluntary cooperation with the U.S. Consumer Product Safety Commission (CPSC), Deere & Company is recalling certain 4000 Ten Series Compact Utility Tractors (CUT) and 110 Tractor Loader Backhoes (TLB) with Hydrostatic Transmissions.
PROBLEM: An internal failure may occur within the Hydrostatic Transmission (HST). The failure prevents the transmission from returning to neutral after the pedals are released. This can allow unexpected motion or cause the tractor to continue moving.
PRODUCT: John Deere models with HST's in the following serial number ranges.
Model Serial Number Ranges
110 TLB with HST LV0110T211067 through LV0110T211617
4210 CUT with HST LV4210H220677 through LV4210H221025
4310 CUT with HST LV4310H232267 through LV4310H233638
4410 CUT with HST LV4410H241367 through LV4410H241821
4610 CUT with HST LV4610H260774 through LV4610H260906
4710 CUT with HST LV4710H270806 through LV4710H271286
WHAT TO DO: Please contact your John Deere Dealer immediately to make arrangements for installation of improved parts. All parts will be installed without cost to you.
Do not drive the tractor until your John Deere Dealer has repaired it. Inform everyone who operates the tractor of the potential danger. If a failure occurs and the tractor continues moving, please follow these steps.
1. Reduce the engine speed by moving the throttle lever to slow.
2. Shut off the tractor by turning the ignition key to off.
Note: This will stop the tractor abruptly.
3. Engage the park brake to prevent movement.
4. Remove the ignition key from the tractor to prevent others from starting the tractor.
5. Inform your John Deere Dealer of the situation.
6. Do not drive the tractor until it has been repaired.
Please insert this letter into your operator's manual.
We hope this recall will not cause you any undue inconvenience. Our efforts are intended to ensure your continued satisfaction with John Deere products and safe operation of your John Deere Tractor.
If you have any questions, please contact the Customer Communications Center at
1-800-537-8233.
Sincerely,
John Deere Worldwide Commercial and Consumer Equipment Division John Deere Commercial Products
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
cef2lion
Join Date: Jul 2003 Posts: 41 PA |
2003-12-22 71937
Just got an E-mail reply from my Dealer on the fix.
Craig
Hi Craig,
My name is Dave Bishop, I'm the Service Mgr here at Wineland's. John forwarded your email to me. Yes, on Friday I learned of the recall. Please call myself or Ken Bowser (Shop Foreman) and we'll make arrangements with you to have this recall completed. The recall involves replacing the Hydro transmission. ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2003-12-22 71939
On another section of the web site it shows the press release date is 12-19-03 as in last friday.
Also interesting that the 2210, 4010, 4100/4110 and 4115's (all built in Japan)are not included. ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
cef2lion
Join Date: Jul 2003 Posts: 41 PA |
2003-12-22 71942
If you look at the serial number ranges it isn't a whole lot of units per model. 4310 is the highest. Might confirm that the 4310 is there best seller?
I have to wonder what was changed in these units transmisisons that caused the issue? Did they make an engineering change to the transmission and if so why?
Craig ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
Chief
Join Date: Jul 2003 Posts: 4299 Southwest MiddleTennessee Pics |
2003-12-22 71957
Good eye Craig! Thanks for the heads up. My 4410 falls outside (below) of that serial # range, but it would be interesting to see what it is that is causing the problem. Glad to see your post! Randy ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
cef2lion
Join Date: Jul 2003 Posts: 41 PA |
2003-12-23 72014
My Dealer ordered the recall kit which includes a hydro transmision. They are coming to get my 4410 this Friday. They are telling me about 4 days. I'm trying to work out some issues with my Dealer about this recall.
Service has stated the recall instructs to drain and re-use the hydro fluid in the new transmission. Is this common practice or would others be concerned about this as I am?
After getting the tractor back they say I should service the transmission in 50 hours by changing the filters and fluid. I just did this right before I got this recall. I have asked that the Dealer provide the material for this service.
Craig ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2003-12-23 72015
Sounds like penny wise and pound foolish to me.
In your shoes I might opt to pay for new fresh fluid if I couldn't embarrass the dealer into doing it. ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
ScooterMagee
Join Date: Jul 2003 Posts: 201 Nebraska Pics |
2003-12-23 72016
I agree, opt for new fluid. At $0.86/qt for low-vis, it's cheap insurance. ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
kubotaguy
Join Date: Nov 2003 Posts: 360 Shepherdstown, WV |
2003-12-23 72019
This is the exact reason to find a good dealer close by. If you bought your tractor from accross the country, guess who's tractor will be fixed first your's or the guy who bought from this dealer? Also the dealer may offer to do the 50 hour service at no or a reduced cost. Just one more example why it is so important to have a good dealer. ....
Reply to | Quote Reply | Add Photo
Recall on JD WEB site
jdgreen
Join Date: Jul 2003 Posts: 232 Maryland |
2003-12-23 72038
I agree that it would be best to change the fuid when changing out the fluid, but Deere's instructions do say to use the old fluid over, but they also recommend using their "oil cart". This special tool is a pump and filter system that is very effective in cleaning up any impurities in the oil. If your dealer does not have this tool, I would definitely use new oil, even if I had to pay for it myself. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This