KK 48 Brush Cutter on a BX
AV8R
Join Date: Oct 2003 Posts: 882 North Central Wisconsin Pics |
2005-08-10 114635
I thought I put this up yesterday, but I guess not.
Has anyone ever ran one of the King Kutter Bruch Cutters with their BX? (XB Series) The new property has some tall field grass to chop down and I don't want to do it with the finish mower. For that situation, is my 2230 strong enough to handle field grass and very small saplings (way less than 1")?
Does any one have an opinion on these units? My KK box blade is a simple chunk of steel and works fine at that, but a brush cutter is a bit more involved. Should it have a slip clutch or is a sheer pin good enough?
Little help for the new "gentleman farmer" please.
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
12251hd
Join Date: Dec 2004 Posts: 37 VA & OH |
2005-08-10 114668
Believe your 2230 will handle a 48 brush cutter just fine. I have a 5 ft 3 pt bush hog that I use on my L-35 (26 PTO hp) and a 6 ft pull type on a MF farm tractor. They both eat high weeds, brush, and even small sapplings with ease. Although one has a shear pin and the other a slip clutch, I perfer the slip clutch. However, make sure the clutch is set up and you look after it annually--tore up a PTO several years ago because of hitting a stump with a frozen clutch. Take it easy--your tractor will tell you when it's needs to gear down. Watch out for those stumps! ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
AV8R
Join Date: Oct 2003 Posts: 882 North Central Wisconsin Pics |
2005-08-11 114697
Even the XB series (supposidly made for sub-CUTs) still rubs? I was hoping to avoid that problem by going with the KK-XB unit. ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2005-08-11 114698
Horsepower wise you should be fine, just take it slow & easy.
As for "Poor Richard" and his advice, I would be skeptical, especially after reading his profile as DRankin pointed out earlier.
Maybe a post, or an email to Art will clear it up.
Best of luck. ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2005-08-11 114701
I agree with Murf. I think this is a guy who has been shown the door twice before.
He has very brown eyes. ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2005-08-11 114703
Here is the truth on the BX hitch. ....
Link:
Click Here
 
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2005-08-11 114704
Other than the attitude, the repeating of, and incorrect use of the comma gives him away.
I also recall the late night, presumably after a few cocktails, posts. ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
Chief
Join Date: Jul 2003 Posts: 4299 Southwest MiddleTennessee Pics |
2005-08-11 114705
I hear ya Murf! That Olde English Malt Liquor and MD 20/20 can really have a negative impact on typing skills. ;O) ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
DK35vince
Join Date: Feb 2002 Posts: 689 Western,Pa. |
2005-08-11 114719
I'm not sure about the XB cutters. But the lift pins on my 6' King Kutter brush mower where to high when I got it.
Made the cutter to close to the tractor and limited my lift height.
I drilled new holes and lowered the lift pins 5"( not a big deal, only took a few minutes to drill the new holes). Works fine now. ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
beagle
Join Date: Jan 2004 Posts: 1333 Michigan Pics |
2005-08-11 114721
Not exactly sure on the brush cutter, but the KK XB Series attachments fit nicely on the Sub-Compacts. They are built for the lower lift heights and hitch up nicely. They have category-1 pins with category-0 spacings, so the stretch is reduced along with a shorter top link height. I have never heard of any one drilling holes in an XB to hook up to a Sub-compact. You will need to cut the PTO shaft to fit the tractor, but other than that, should hook up nicely. ....
Reply to | Quote Reply | Add Photo
KK 48 Brush Cutter on a BX
oneace
Join Date: Mar 2004 Posts: 1490 south central pa Pics |
2005-08-11 114733
Over the years I have had to cut many pto safts from some of the best manufatures, it is come to be expected. Better to be too long than too shrot.
Osifer I'm not as think (hik-up) as think, as you drunk I am. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This