Yanmar YM155D problem w replacement gear from Yanmar: Yanmar Tractors  -- Other Tractor Brands Discussion Forum and Review Yanmar YM155D problem w replacement gear from Yanmar: Yanmar Tractors -- Other Tractor Brands Discussion Forum

  parts   |   discussion   |   photos   |   podcast   |   reviews   |   specs   |   dealers   |   classifieds   |   contact   |   faq   |   myProfile   |   home          Login Now | Sign Up


FAQ:   What is a tractor?

Forum Index


New As Posted | Active Subjects



Click to Post a New Message!

Discussion Boards > Active Subjects > Messages as Posted > Yanmar Tractors Forum

Page [ 1 ] |
Reply | Pop Up Window Reply | Add PhotoAdd Photo
 08-21-2003, 15:01 Post: 62353
John A
2003-08-21 15:01:10
Post: 62353
 Yanmar YM155D problem w replacement gear from Yanmar

I've got a Yanmar YM155D --the 1st/reverse gear on the transmission croked (1st/reverse gear 14T #194340-25530) ...found a dealer in MS who gave me a good price and ordered the part...the part arrived but the ID (inside diameter) of the gear has not be machined...the race which the gear glides on won't fit inside the gear...so, sent it back to the dealer, subsequently the dealer sent it back to Yanmar...they sent out a new gear --WITH THE SAME PROBLEM !! Long story short --this has been going on since May, 2003 and Yanmar (as told by the dealer) is unwilling to rectify the problem. So, here I am waiting and woundering if Yanmar is worth all the hassel? The big question is "am I the only one with this same experience working with Yanmar".






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 08-22-2003, 04:42 Post: 62406
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

2
Filter by User
 Yanmar YM155D problem w replacement gear from Yanmar

No experience with Yanmar parts myself nor do I know the TX. I'm wondering if there's a chance that the gear is intended to be shrink fit onto the race I guess it's a compound bearing and it would be the outside of the outer race that is maybe recessed into the gear. Granted it's a stretch of an idea. I haven't seen anything like that in the TX's I've been into, but it's just a thought. A manual should mention such a procedure if that's the case. If so, the original one might have been loose due to the cracked gear.

Another possibility is that the bearing race has a spur on it due to the original damage. Unfortunately the more likely possibility is that Yanmar has a new OEM supplier and the gears aren't exact replacements.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 08-22-2003, 18:01 Post: 62474
jamtrac2003



Join Date: Jul 2003
Location: honesdale, PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 9

2
Filter by User
 Yanmar YM155D problem w replacement gear from Yanmar

Yanmar parts are normally very accurate in their dimensions. Perhaps the part has to be pressed on.
Of course it is possible that a part was made wrong, but two?? Take a Micrometer and measure the I.D. of the part, then measure the O.D. of the race it goes into, if they are close, then it is a press fit. If they are not close, have the gear machined out, it will be faster than re-ordering again. Gary J.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 09-21-2003, 09:16 Post: 64470
AEP1
2003-09-21 00:00:00
Post: 64470
 Yanmar YM155D problem w replacement gear from Yanmar

Take the gear to your local machine shop. They will know if the I.D. is right for a pressed-on fit. If it is not they will be able to machine to the right ID for your shaft. They can also broach a keyway if need be.

Good luck
Andy






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 09-21-2003, 17:10 Post: 64489
jamtrac2003



Join Date: Jul 2003
Location: honesdale, PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 9

2
Filter by User
 Yanmar YM155D problem w replacement gear from Yanmar

I just looked in the YM155D Parts Manual, Yanmar made two different gears for 1st/rev. If your s/n is before 51000, then it calls for part no. 194200-25530.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 09-22-2003, 06:48 Post: 64511
TomG

TP Contributor

Join Date: Feb 2002
Location: Upper Ottawa Valley
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 5406

2
Filter by User
 Yanmar YM155D problem w replacement gear from Yanmar

Good info, and that's the second reason why I have a parts manual. The first reason is for the exploded diagrams. There are all sorts of notes in my Ford manual about part differences before and after production upgrades or for models marketed if different regions. My manual is hard copy and may be a bit out of date but a dealer's shouldn't be.

There's a good chance that's the problem, but you'd also think that a parts guy would have noticed several dated entries in the manual and would have asked for the tractor's serial number.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 12-12-2019, 14:24 Post: 198885
Yorcire



Join Date: Dec 2019
Location: Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 2
 Yanmar YM155D problem w replacement gear from Yanmar

I would lke to know if you figure the problem woth that gears,,, I need to replace mine aswell and having so hard time the find a replacement gears,,, if you can send me the pjone number where you didnfind yours would be very apreciate thanks...






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 12-13-2019, 08:53 Post: 198887
bmaverick



Join Date: Oct 2014
Location: Honky Tonk TN
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 20
 Yanmar YM155D problem w replacement gear from Yanmar

Fredricks Imports in Alabama

Hoye Tractor in Texas

These 2 places would be your 1st go to as both have new and used OE parts. With the used parts, many come from low hour machines only brought from Japan, not Vietnam.

There is a place in IL called Schafers too. Not sure how much inventory they carry.

The YM155 has the 2TR13A engine that shares many parts with the Yanmar gray market machines. So, you are in good shape with the above dealers and refurbished equipment vendors.

If you need engine rebuilding and such, Weavers' and Stevens Tractor is a good place to start. Also, Southern Global is there too, but they are a bit pricey.

Over on the Yanmar GIO member site, our archives has folks who have swapped gears out and with photos. At the moment, we are moving from Yahoo Groups to GroupsIO. You will need a hydraulic press or find a local shop to work with in your area. Not really a hard job, just takes some time like most things do.

I have the service parts manual as well in PDF should you need that too.






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
 12-13-2019, 09:19 Post: 198888
winston1



Join Date: Sep 2010
Location: gilmer,texas75645
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster
Posts: 84
 Yanmar YM155D problem w replacement gear from Yanmar

I notice the parts manual shows two different part numbers for the gear in question. Are you sure you ordered the correct one? I am not computer savvy enough to post the page but the two part numbers are 194340-25530 (gear 14/14,reverse) and 194200-25530 (gear 13/18, reverse).






Reply to PostReply | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo | Share This
Reply | Pop Up Window Reply | Add PhotoAdd Photo


Page [ 1 ] |

Discussion Boards > Active Subjects > Messages as Posted > Yanmar Tractors Forum

Thread 62353 Filter by Poster:
AEP1 1 | bmaverick 1 | jamtrac2003 2 | John A 1 | TomG 2 | winston1 1 | Yorcire 1 |



SEARCH


 (Advanced Search)

Picture of the Day
CountryFolk

Parts and Repair - Ford 3600 Hydraulics Top Cover 3pt Lift Cylinder Slector Valve
Ford 3600 Hydraulics Top Cover 3pt Lift Cylinder Slector Valve


Recent Posts without Replies
   Fuel in motor oil
   Hinomoto E2602 How to bleed fu
Recent Topics with Activity
   Tractor dies when put in gear
   Is a tiller a good tool for la
   New Kubota Track Loader Need G
   Remembering when I joined TP
   Best way to level Lawn
   Zero Radius vs Compact Tractor
   Kubota Tractor Tires Tubes or
   Why soil Testing is a Waste of


Featured Suppliers

Mountain Creek Labradoodles
      MountainCreekLabradoodles.com





New Forums on Gun Sport Shooting and Hunting -- BarrelPoint.com  New Forums on Horses ManePoint.com
Talk Horses at ManePoint
Hunting + Gun Sports at BarrelPoint



Most Viewed

+ Yanmar 1500 how to operate
+ What are wet disk brakes
+ Yanmar 187D information
+ Yanmar 1500 Diesel Tractor
+ YM 1500 transmission fluid change
+ yanmar 1500D overheating
+ Roger Whats so great about Yanmar 336D
+ Top 5 things to do when bringing home a new tracto
+ Yanmar 155d
+ yanmar 155d

Most Discussion

+ Yanmar 1500 how to operate
+ No more parts for Yanmars
+ No More Parts for Yanmars -- P
+ Feeding Deer
+ Oil filter
+ Yanmar 1500D 4 wheel drive doe
+ engine compression
+ Top 5 things to do when bringi
+ Oil Filters
+ Front wheels and tires for an

Newest Topics

+ Starter or solenoid
+ Yanmar on a Gravely Promaster 360
+ New altenator Yanmar 169
+ REAR AXLE
+ fuel issue
+ pro on ym155s
+ Hydraulics Won t Work
+ Operation
+ 1500D Dash lights
+ Yanmar 1500D hydraulic fluid change