Go Bottom Go Bottom

Axle extenders D1650FD

View my Photos
fellerbass
Join Date: Oct 2012
Posts: 14 Port Washington Ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-04-02          186561

Looking for Axle extenders for my D1650FD
Anybody have a idea on where to get them?


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-04-08          186612


Might be a time for you to figure out the bolt placement on the hub with diameter and head off to your local compact tractor dealer and see what tractors also run the same bolt and hub pattern. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-04-09          186633

I figured you could have ones for rear wheels made but the front axle stumbles me. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-04-09          186634

Do have a question, how much are you trying to extend the axles? Are you certain there is no offset in the rims to give you what you want? ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-04-10          186646


I've only seen them from the factory for the rears. I have seen them made for both axles and in use. The front ones would have a great leverage point to work from for more breakage of hub axle and steering components. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
fellerbass
Join Date: Oct 2012
Posts: 14 Port Washington Ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-04-10          186649

I'm looking to extend the rear axles 8 to 10 inches.Already turned the rims to the outside.I know this is a gray market tractor,I was hoping that someone might point me in the right direction to find some already made.If not next winter I'll make a set.
Thanks in advance.
Rich ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
frank016
Join Date: Apr 2013
Posts: 9 new zealand
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-04-13          186673

My MT4700 is way too narrow too! Plan to have a local shop make extentions. By the time I hunt for ones on the market, my little beast could roll on me!
Stil looking for a manual! Any help out there??
Frank ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
frank016
Join Date: Apr 2013
Posts: 9 new zealand
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-04-13          186674

Just wish there was an offset on the wheels! The rims are one way only! ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Axle extenders D1650FD

View my Photos
Murf
Join Date: Dec 1999
Posts: 7249 Toronto Area, Ontario, Canada
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-04-13          186676

I would think that it would be a pretty risky move to try to extend that far.

Even just a few inches extension adds dramatically to the leverage on hubs and spindles.

If you are determined to spread the wheel track, it might be easier to have a local machine shop cut the centers out of your existing rims and make them into offset rims. That or find, as Art mentioned, another unit with the same wheel and source rims for them.

Best of luck.. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login