Go Bottom Go Bottom

2 spool loader controller

View my Photos
tbear640
Join Date: Aug 2014
Posts: 19 Rhodes Michigan
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2019-06-06          198505

What are the considerations when changing a 2 spool joystick controller on my Massey 1428V. Flow rate and ?, are there other factors when exchanging one controller from another. I have access to other 2 spool controllers.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



2 spool loader controller

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2019-06-17          198562

Gallons per minute should exceed the capacity of the pump at max rpm, open or closed center (most are open center), power beyond if you want to add a control (or just get a 3 spool.)
Your preference for single stick for all controls or dual stick.
pressure relief valve, I found out the hard way just how important this is when a quick release coupler stayed closed. Some controls have pressure relief built in, most do not.
You can look at this stuff at surpluscenter.com.
I added a pressure relief valve on the output of my hydraulic pump. So anything that happens will bleed off at 2000 psi. Also added a directional valve to run my log spliter . ....


Link:   

Click Here


 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login