Go Bottom Go Bottom

Replacement Loader Bucket for B7510

View my Photos
roaf3x
Join Date: Jul 2005
Posts: 56 CT
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-09-02          156455

I was wondering if anyone knew what company makes the 54 inch loader for the new 20 hp Bobcat tractor.

It was a much heavier duty bucket than what is on my LA302.

Has anyone swapped a bucket? I would like a slightly wider bucket with enough strength to lift rocks without bowing on bottom or the top. My bucket has had a hard life after 3 years of work .

I would appreciate any of your ideas or other places to look.

Thanks,

RD


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Replacement Loader Bucket for B7510

View my Photos
auerbach
Join Date: Sep 2007
Posts: 2168 West of Toronto
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-12-03          158318

If you like metal work, there are firms (e.g. CadPlan) that sell plans and, if you want, materials for making a bucket. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Replacement Loader Bucket for B7510

View my Photos
Art White
Join Date: Jan 2000
Posts: 6898 Waterville New York
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-12-11          158511


To change to a heavier bucket would make picing those rocks harder as the weight of the bucket would lower the amount of load you can carry.

On a bowed bottom of a bucket we often buy a four inch cutting edge and add it to the bottom lip to stop the bending and save the bucket that you have. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login