Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

What is the price of a new B2733 for a B7510. It is the "quick hitch " subframe for front mounted implements. <br>
There are not any used ones to be had. <br>
<br>
Thanks !!<br>
<br>
RD

b2733 for B7510
Kubota Tractors
Replies 2 Post by roaf3x

Hey Joel;

Thanks I will look and see if there is a shutoff.

I did not see one by the filter bowl.

I have noted your cautions.

Thanks!!

Roy

Fuel Filter on B7510
Kubota Tractors
Replies 3 Post by roaf3x

Does anybody know if there is a Kubota hydraulic plow for the L2800. <br>
<br>
There are still L2172A plows out there but what do they fit? <br>
<br>
Can you buy a new L and but a blade on the front. <br>
<br>
My dealer in CT is not very helpful so I plead to the masses <br>
<br>
for information. <br>
<br>
Many thanks !!<br>
<br>
RD

l2800
Kubota Tractors
Replies 1 Post by roaf3x

I think if you log into Messicks they have a guide with pictures. It covers the complete fluid change.

http://www.messicks.com/tractorservice.aspx

Try this site it is a great source. They also do online parts if you need things shipped to your house.

This is a great site with all of the help you will need.

Post if you have more questions.

Cheers,

RD

Kubota B7510 Oil Change
Kubota Tractors
Replies 18 Post by roaf3x

Thanks Art;

I was hoping the subframe and plow I have now would have fit any of the bigger b's. The front frames look so close.

If I upgrade my current tractor I will have to get a whole new plow and subframe?

Cheers,

RD

B3200 B3300 B3030 Plow and part number and price
Kubota Tractors
Replies 3 Post by roaf3x

I would check a couple of things.

1. Is your real axle adjusted all of the way out? I do a fair amount of side hill work and this has helped.

2. Are you loaded in the rear tires? A weight box or rear ballast or both are required for any loader use.

3. If you are carrying a load slow speed and low range 4wd and keeping the bucket close to the ground. The articulating nature of the front of these B's makes them somewhat unstable.

4. What type of tires do you have? Have you check the pressures?

This is a fantastic forum. Please post your questions here because it is way better to learn from the mistakes of others rather than repeating them. A rollover is no joke!

For what it is worth I have a 7510 with the LA302 loader.

Cheers,

RD

Kubota B7500 stability and use
Kubota Tractors
Replies 9 Post by roaf3x

Has anybody priced one of these units?<br>
I am thinking of selling to upgrade? <br>
I would love to hear the good or the bad. <br>
I checked with my dealer in CT and they "will never"<br>
stock it. I will begin the quest. <br>
Has anyone plowed with the Meyers plow with the quick attach feature. One of the reasons to upgrade is to do away with the subframe on my current plow. <br>
All thoughts and comments are welcome as I am shopping !<br>
<br>
Cheers, <br>
<br>
RD

B3300 SUT
Kubota Tractors
Replies 2 Post by roaf3x

Hi Guys:<br>
<br>
I have a friend who is going to change out an engine mount on a 755. I am a Kubota guy so I am not in the "know" on this. This tractor had a fuel leak which rotted the mount. <br>
<br>
Does anyone have any baby steps guidance on how to do this. <br>
<br>
I realize the dealer is a last resort. The gentleman doing the repair was a P+W Jet engine engineer so the skills are good the knowledge base is weak. <br>
<br>
Thanks to any and all who reply. <br>
<br>
Cheers, <br>
<br>
RD

John Deere 755 Engine Mount
John Deere Tractors
Replies 2 Post by roaf3x

Gentelmen;

Thanks for all of the replies.

I have passed this along to the "higher" power (my dad).

The conclusions are:

1. Cold is bad Palm Beach or Palm Springs Kubota guys never have this discussion.

2. Heat is your friend. Block heater is required if you live anywhere north of CT. Even a trouble light under the hood may save your bacon.

3. Heat your battery or sleep with it. It may be warmer than your wife.

4. Know your oil! Change it frequently and 40W or 30 W makes a difference.

5. UDT or Super UDT .....only your hydraulic pump knows but it was made for cold or hot You Decide.

6. Murf Knows all.....

Thanks to all who responded. I am always in awe at the breadth of knowledge and experience on this board.

Thanks !

RD

Hard Starting BX22
Kubota Tractors
Replies 10 Post by roaf3x

Thanks for the information. It is always better to ask first then to wonder why later.

Tread position vs actual pressure is also an interesting discussion.

Thanks

RD

Tire Pressure Check in B7510
Kubota Tractors
Replies 10 Post by roaf3x

I am not sure if being a quart low would be the culprit but it fixed the problem . Thanks for the help!!

RD

bx 2230 slow to dump with loader
Kubota Tractors
Replies 9 Post by roaf3x

Hello All;

Thanks again for the great information. The fitting was a metric hex(12 Mm) It was 1.72 @ the Kubota dealer here in CT.
One out and new one in and regreased.

Thanks !

Roy

Replacement of Grease Fitting on LA302 loader
Kubota Tractors
Replies 9 Post by roaf3x

Duly noted. I am taking it off to replace it with a new bucket from ATI. I will get the quick attach from ATI on my next tractor which will be the 7800 or the 3030.

Cheers,

RD

Loader bucket removal procedure on B7510 wit LA302
Kubota Tractors
Replies 7 Post by roaf3x

I was wondering if anyone knew what company makes the 54 inch loader for the new 20 hp Bobcat tractor. <br>
<br>
It was a much heavier duty bucket than what is on my LA302. <br>
<br>
Has anyone swapped a bucket? I would like a slightly wider bucket with enough strength to lift rocks without bowing on bottom or the top. My bucket has had a hard life after 3 years of work .<br>
<br>
I would appreciate any of your ideas or other places to look.<br>
<br>
Thanks,<br>
<br>
RD

Replacement Loader Bucket for B7510
Kubota Tractors
Replies 3 Post by roaf3x

I have bought many parts from Keller Kubota in Lebanon PA.

They have consistently delivered parts at a fair price with

great service and shipping.

Really, I do not work there. I live in CT.

Please post if you need any more details.

Cheers,

RD

Online parts source for Kubota
Kubota Tractors
Replies 8 Post by roaf3x

I removed the two filters and removed all four drain plugs. I thought for sure the front and rear case were empty after 30 minutes of draining.

I have now re-drained 3 qts and am within an eighth on an inch of the top fill line.

It would seem 4.04 is a little much. I have been trying to get hold of the Kubota Folks to verify where the "capacity" numbers come from .

WE shall see...

Cheers,

RD

Can you Damage Your HST if you put too much UDT in
Kubota Tractors
Replies 12 Post by roaf3x

Has anyone else had trouble with this nut? It seems painted on ?

Thoughts or suggestions to get this bugger off?

Thanks.

Roy

What Size is the Hydro Screen Nut in B7510
Kubota Tractors
Replies 2 Post by roaf3x

I have a B 7510 with La 302 Loader. I am also trying to keep my wife happy with a larger tractor!
Please Email me with a picture and a price when you get one. You will not find a better real world opinion then where you are now.

Roaf3@aol.com

Kubot B7800 downsize advice
Kubota Tractors
Replies 9 Post by roaf3x

Has anyone made a checklist for doing a 50/100 hour inspection on their b7510. I am at 78 hours and am planning to combine the recommended and required items into one inspection over the weekend. <br>
I have been reticent in not getting to know this tractor. <br>
<br>
I would love to hear any other experiences or suggestions. <br>
<br>
Thanks to all who reply ! <br>
<br>
RD

50 100 HOUR ON B7510
Kubota Tractors
Replies 2 Post by roaf3x

Greetings all. I have the pleasure to report the replacement seat for the B/BX is worth the wait. <br>
Does anyone know if there are armrests that are made for these seats. <br>
My dealer was truly helpful (Midstate in Midddletown CT) . They also mentioned that a midwest dealer ordered 3000 of the seats. They had ordered 15. It seemed a little skewed to me. <br>
My dealer also mentioned that they have had folks bend the base of their current seat up to make it "gravity defying".<br>
<br>
Cheers,<br>
<br>
RD

New seat for B7510 is worth the wait
Kubota Tractors
Replies 3 Post by roaf3x