Go Bottom Go Bottom

amt 600

View my Photos
rt4runner
Join Date: Jun 2010
Posts: 3 tennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-06-29          171920

I replaced the old KF-82 motor with a new FE250D-JD-AMT600-A motor a few modifications now I am having problems keeping it running. the fuel filter doesnt fill all the way up not sure if it will when running almost acts like its not getting enough fuel. with a new engine i think this is the only thing left is the fuel pump.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



amt 600

View my Photos
kthompson
Join Date: Oct 2005
Posts: 5275 South Carolina
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-06-29          171953

Some filters seem just to keep air in them but still supply plenty of fuel. Why did you replace the engine, was not for same reason was it? If so check your fuel tank and lines for blockage. Be sure you have a good air flow also?

....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



amt 600

View my Photos
gatormaki
Join Date: Apr 2009
Posts: 33 Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-06-29          171962

My bet is you need a fuel pump or pump diaphragm kit. Has nothing to do with air in the fuel filter. I fought this problem for months on a cx when it started acting up with barely a year on it. Replaced the pump and it runs great.

Some one elsed mentioned on this board about the short life of the pump diaphragm on these motors. It's a cheap aftermarket part- pump or kit

....


Link:   Parts Tree

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login