Go Bottom____________________________________________________________________________________
Craftsman cultivator edger 4 cycle engine stalls
 | circlediron
Join Date: Jul 2009 Posts: 35 Noxapater, MS 
|
2012-08-05 184556
can crank engine and engine will run well but when increase engine speed the engine will stop quickly I CLEANED CARB but engine when cranked will run well but still cannot increase engine does any one have idea I may be able to do
Reply to |
Quote Reply |
Add Photo____________________________________________________________________________________
Craftsman cultivator edger 4 cycle engine stalls
 | kthompson
Join Date: Oct 2005 Posts: 5242 South Carolina 
 Pics
|
2012-08-06 184570
Did you clean the carb by using a cleaner or taking it apart? If you have been using ethanol/gasoline mix may not clean user typical gas system cleaners. Also if you have been using ethanol mix it may have damage fuel lines.
Also check your exhaust to be sure it is open.
I would try to find 100% gas and run a tank or two through it and might use Sea Foam cleaner also. ....
Reply to |
Quote Reply |
Add Photo____________________________________________________________________________________
Craftsman cultivator edger 4 cycle engine stalls
 | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto
Pics
|
2012-08-06 184575
I'd check the throttle cable and linkages. What brand is the engine? ....
Reply to |
Quote Reply |
Add Photo____________________________________________________________________________________
Craftsman cultivator edger 4 cycle engine stalls
| kthompson
Join Date: Oct 2005 Posts: 5242 South Carolina
Pics
|
2012-08-07 184590
Not trying to answer for circlediron but think may be a Roybi for the attachments are the same between them. ....
Reply to |
Quote Reply |
Add PhotoReturn to index
Go Top
Share This