Go Bottomstuck plow
 | MICKLAPORTA
Join Date: Dec 2010 Posts: 5 frostburg 
|
2010-12-23 175919
while using my power angle plow on my kubota l4630 today everything was fine then while angleing my plow it stuck in the far right position , i run it off my rear remotes when i disconnect remots for a while and reconect it will angle left but when i angle back right it sticks help!!
Reply to |
Quote Reply |
Add Photostuck plow
| hardwood
Join Date: Dec 2002 Posts: 3583 iowa 
|
2010-12-24 175922
If you have a couple extra male tips for the hoses I'd swap them out. Baring something on the plow it'self catching it sounds like you have a tip with a weak or broken spring in a male tip. They lock up when that happens.
Frank. ....
Reply to |
Quote Reply |
Add Photostuck plow
| MICKLAPORTA
Join Date: Dec 2010 Posts: 5 frostburg
|
2010-12-24 175923
do you mean tne tips that go into my rear remot or the quick disconnects? thanks mick ....
Reply to |
Quote Reply |
Add Photostuck plow
| hardwood
Join Date: Dec 2002 Posts: 3583 iowa
|
2010-12-24 175924
MICK;
Yes, it can also be the female half, on the tractor, but in my experience the male tip us normaly the culprit.
Frank. ....
Reply to |
Quote Reply |
Add Photostuck plow
| MICKLAPORTA
Join Date: Dec 2010 Posts: 5 frostburg
|
2010-12-24 175925
i swaped ends side to side same result goes right and wont come back could i have a cylinder problem or maybe my quick connects up front. thanks mick ....
Reply to |
Quote Reply |
Add Photostuck plow
 | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto
 Pics
|
2010-12-24 175926
Sometimes low-cost quick-connects don't seat square so try disconnecting and carefully reconnecting. Otherwise I don't know your system but you might check for a sticking valve. ....
Reply to |
Quote Reply |
Add Photostuck plow
| MICKLAPORTA
Join Date: Dec 2010 Posts: 5 frostburg
|
2010-12-24 175931
thanks and MERRY CHRISTMAS for everyones help it was my front quick connects thanks again mick ....
Reply to |
Quote Reply |
Add Photostuck plow
 | Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada
Pics
|
2010-12-24 175933
Mick, it's either as mentioned, a bad quick-disconnect fitting, or a bad seal in the remote itself.
If you turn of the machine and with it off, cycle all the controls for the remote then unplug them all I believe you will find one fitting that you can move the ball or plug with just a light touch of your finger or screw driver or something.
If that doesn't work then just reverse all the connections you can till the problem changes.
Best of luck. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This