Go Bottomelectric gator
 | brandyroxsam
Join Date: Jul 2009 Posts: 3 florida 
|
2009-07-16 164124
48 volt e-gator wont run just get a double click from relay under seat. at first when it doubled clicked a little push would get it going now it is dead. any help thanks.
Reply to |
Quote Reply |
Add Photoelectric gator
 | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto 
 Pics
|
2009-07-17 164138
A Gator powered by six 8V batteries? Is that a factory model or a home-made? ....
Reply to |
Quote Reply |
Add Photoelectric gator
 | earthwrks
Join Date: Dec 2003 Posts: 3853 Home Office in Flat Rock, Michigan
Pics
|
2009-07-17 164141
Auer it was factory made--just google "deere e-gator". ....
Reply to |
Quote Reply |
Add Photoelectric gator
| auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto
Pics
|
2009-07-17 164150
Didn't know. Found that it has eight 6V deep-discharge batteries. (Replacement time would make for an interesting shopping trip.)
Seat cutoffs can be troublesome; I bypassed it on my Elec-Track. Or, there are several electric or battery tractor sites where members will help, and an E-Gator service manual is on ebay. ....
Reply to |
Quote Reply |
Add Photoelectric gator
| brandyroxsam
Join Date: Jul 2009 Posts: 3 florida
|
2009-07-17 164153
This e- gator is a 2002 new batteries, no seat switch, a curtis dc motor controller that flashes a status code of 3 flashes pause then 5 flashes. the relay that is clicking and not staying closed, is the relay that supplies power from the batteries to the motor controller, the relay is good the control voltage to the relay checked with a meter is on off on off (click click click click) all four switches on this machine are good and working. thank you for your help. ....
Reply to |
Quote Reply |
Add Photoelectric gator
 | Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada
Pics
|
2009-07-17 164155
If it is a Curtis controller, the flash is a fault code, the description of what it is will be in the manual for the controller.
If you don't have one, all you need is the model number of the controller and you can download it as a PDF document from the Curtis website.
Best of luck. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This