Go Bottom

JD 4410 Blows fuse in 2 wheel drive

View my Photos
Mopardan
Join Date: Apr 2009
Posts: 10 Central Ar
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2006-04-19          128026


My JD 4410 has been flawless, until a couple of weeks ago. Now when I push the switch for 2 wheel drive, it blows a fuse. Tractor dies and lose all guages. I can replace the fuse and put in 4x4 and runs normal? Switch to 2 wheel drive, blows fuse. I think its the fuse for "switched circuits". Any help would be greatly appriciated!



Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD 4410 Blows fuse in 2 wheel drive

View my Photos
Peters
Join Date: Feb 2002
Posts: 3034 Northern AL
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-04-19          128034


It sounds like there must be a dead short in the solenoid that pulls the link out for 2 wheel drive. I am not sure where the solenoid is but you should be able to test for its resistance and short to the main ground. ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD 4410 Blows fuse in 2 wheel drive

View my Photos
Chief
Join Date: Jul 2003
Posts: 4297 Southwest MiddleTennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2006-04-19          128038


Check your 4WD solenoid under the tractor under the operator's station area to see if any of the wires have snagged on brush or other obstacles. They are notorious for becoming snagged in heavy brush. Are you getting any malfunction codes? ....


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


   Go Top


Share This







Member Login