Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I have a 6X4 with 110 hours on it. It is not obtaining full power and can hardly make it up a hill. I have changed the fuel filter, oil and filter, air filter, regapped the plugs and cleaned the spark arrestor. Any ideas what may be wrong?

6X4 With High Speed Power Problem
Utility Vehicles UTV/ATV
Replies 5 Post by Tinwoodsman

Well the ignition module did the trick, runs like new!! Gatoraider, do you know anything about adjusting the brakes on this model? They have relatively new pads, but it is a little difficult to stop. Although, my hydraulic lift reservoir was leaking on the right caliper so I got that fixed and I am going to spray it down with some brake cleaner. That may make a difference. IF you do know any adjustment techniques I would appreciate your input. Thanks.

AMT 626 quits when hot and will not restart
Utility Vehicles UTV/ATV
Replies 16 Post by bluebm3w

i now have a 5603 with a lot of problems looking at trading for a 5105m please comment with any knowledge about either one of these troctors.

thinking about a 5101m any comments welcome
John Deere Tractors
Replies 3 Post by JDMAN1

I'm sure there are named standards for rim-holes but I'm not familiar with them. There are bolt-hole templates, but I've only seen them in tire shops. The simplest would be to get the seller to hold a piece of paper against the rim and use a crayon, pencil, or poke-through to mark the location of the holes, and then test that against yours.<br>
<br>
There's a big Yanmar dealer that has a sale on turfs, and might know the 'bota pattern. But shipping from Texas won't be cheap.<br>
<br>
Finally, there are adaptors, either factory or custom made, if you want to look into them. Good luck.

turf tires and rims for b7800
Kubota Tractors
Replies 8 Post by auerbach

Thanks,

Have shot them an Email.

Shibaura part needed P21 P19
Shibaura
Replies 4 Post by carcool

You might get some info on the site CompactTractorReviews. But all three are longstanding brands, so I'd go with the nearest and most helpful dealer.

JD 2305 vs kubota bx2360 vs mf 2600
John Deere Tractors
Replies 3 Post by auerbach

If you have turfs on now, many Yanmar owners would love to switch their lug tires for turf ones. If you can find out if your rims fit any Yanmar models, I can put you in touch with them about trading.

AG Tires
New Holland Tractors
Replies 5 Post by auerbach

Did someone say "yank"?

I prefer loose for all the same reasons Franky said. You have better inital steering too since the implement still wants to follow but not so ridgidly.

swy bar adjustment
Kubota Tractors
Replies 3 Post by earthwrks

blackhawk

have you ever broke cv joints or anything like that i have no cab but have read that they let alot of dust in as well it that a problem for you. have had no brake issue but see they are like 70 or 80 bucks.

850d gator
Utility Vehicles UTV/ATV
Replies 16 Post by pugwash4

I assume this is for ANY Kubota dealer; including Art--not just Emerichsales. I found the post helpful although I personally don't do 0% interest. was offered that when I bought my Kubota--turned it down. JMMHO again

Kubota 0% for 60 Months is Back
Kubota Tractors
Replies 18 Post by charlieK

No thanks on the 151 . The previous owner told me the only way he could start it was to use either . He didnt use it much but damage was done . I will get it to start the way it should or it will be on Ebay .

Need help for Mitsubishi K3A hard starting
Mitsubishi
Replies 3 Post by sparetime

I understand your point but
a) I can't identify the right manual, in ebay or other places after several hours of search and
b) as I live abroad, I would get it too late if posted.

There might not be so many pages, I understand the B7200 wiring is simple.There might be 3 or 4 connections max, probably 2 or 3 only to/from the alternator .. if somebody tells me just where they go, plus some key info (if any in the book) this may be enough...
Thks

alternator wiring on a Kubota B7200
Kubota Tractors
Replies 3 Post by tractobreizh

I agree with KT, Woods has made good stuff for a long time, but any brand three point hitch type backhoe is real hard on the three point hitch of any tractor.
Woods may offer a subframe type backhoe that usually uses the thre pint hitch arms to lift the hoe into place then it is fastened to the subframe. The subframes I'm familliar with stay on the tractor without affecting the use of other attachments.

Woods 1050 backhoe attachment
Loaders Back Hoes
Replies 6 Post by hardwood

Many bearings are industy standards and can often be found in most major auto parts stores. They do have numbers on the bearings. Again most do.

DS 1305 Hinomoto tiller
Hinomoto
Replies 3 Post by kthompson

Hey thanks for the insight I will look into some of the other makers of loaders. Thanks Again

MT180 D
Mitsubishi
Replies 3 Post by Awaltz

Thank you.

Todd

Manual for Kubota L245
Parts and Repair
Replies 7 Post by tnilsen

I run R4's on my L4350. Had special rims made for the front so I could get a 12" wide tire. Fronts and rears are 10 ply.
I work in the woods and in the field. I wanted the toughness and puncture resistance. Had R4's on both front and rear of my B7800 but went with an R1 on the front as it was the only way I could get a wider tire and match the static loaded radius. Had to use 12" rims. A bonus is that they are 6 ply to the stock R4's being 4 ply. Happy with both set ups.

tires
Kubota Tractors
Replies 10 Post by magicheater

Try Mitchel and son's in central city kentucky.
If thay don't have it thay will know someone that dose.

JD 2010 PTO parts
Antique Tractors
Replies 4 Post by jgedling

more like 15k--jmmho

Correct price for a 3010
Kubota Tractors
Replies 3 Post by charlieK

I don't know the Case line but Yanmar owners are always replacing the battery, starter, alternator, wiring, key switch when it just needs a new voltage regulator.

Case 570LXT Alternator problem
Case
Replies 2 Post by auerbach