Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

the box blade is a 54inch land pride that is 400lbs. running abut 1200 rpms setting and then when I am running around1500 t0 1700 I can feel the pump kick in . I have only had the tractor for about 30 hrs. and the hyd. fluid is full and appears clean ,not dirty . It only has one control to raise and lower . Thanks

2009 John Deere 3032e 3PH lifts slowly
John Deere Tractors
Replies 7 Post by ajagracat

I have a 3032 e. How long should your 3 pt. stay up with out anything on it or with some thing on it after you turn off the tractor. Mine goes down after a while. Thanks

JD 3032 e Normal 3 point hitch pressure loss
John Deere Tractors
Replies 5 Post by ajagracat

I got that seal put in yesterday. I took my brother and me about two hrs. thanks for the help

jd 3032e ft rt spindle seal
John Deere Tractors
Replies 11 Post by ajagracat

I have a 5.5 box blade and I dont know what brand it is,when I took the ripers out and each had a v shaped piece with the ends curved out about 3 inchs long holding them in place behind them.Now I dont remenber how they go back in the correct way ,I tried with the the v end up and down does any one know the correct way and what brand this is ? Thanks

box blade riper v spring
Operating and Attachments
Replies 2 Post by ajagracat

Is a 5.5 ft. box blade to big for a 3032e?

John Deere 3032E Tractor Right Size Box Blade
John Deere Tractors
Replies 2 Post by ajagracat

When changing oil,does the oil strainer assembly in the bottom of the motor need to be taken out and cleaned? Thanks

oil strainer assembly
Jinma Farmpro Agracat Nortrac
Replies 2 Post by ajagracat

I have a 05 1040 cub cadet with 250 hrs. on it and it still runs like new,I take good care of it maintance .The only thing I have done is put a new drive belt on and had the carb. serviced. I use my leaf blower to blow the dirt off the deck and motor and entire mower then I wipe it down and cover it up in my shop.I also have a 08 1050 with 100 on it and the both look like new. BUT with that said you need to buy them from a cub cadet dealer .I bought mine at home depot but found out later to go to a dealer and you pbs. will be take care of.I have 3.5 acres of yard to mowe.

HOme Depot does not want to do anything after a cub cadet purchase
Cub Cadet
Replies 17 Post by ajagracat

Greg what should the oil pressure on a 2cyl. 20 hp. be/ Thanks

oil pressure
Jinma Farmpro Agracat Nortrac
Replies 6 Post by ajagracat

I have a jd hydro 165 and when you raise the seat up there looks like a place to pour oil into the tran. how do you check it? Thanks

hydro 165
Garden Tractors
Replies 1 Post by ajagracat

Greg thanks I will try that when I get it back together.

fuel pump hand pump
Jinma Farmpro Agracat Nortrac
Replies 5 Post by ajagracat