YM 3110 Lift
jpmcdaniel
Join Date: Sep 2004 Posts: 2 mississippi |
2004-09-07 95836
New to this board and looking for help. I just bought a YM 3110 with power steering. The steering works great but the lift is very slow. With an implement attached if the rpm's drop below 1500 the weight of the implement pulls the lift down. The fluid is new and clean. Any ideas or is this typical of yanmar operations?
Reply to | Quote Reply | Add Photo
YM 3110 Lift
kwschumm
Join Date: Feb 2003 Posts: 5764 NW Oregon Pics |
2004-09-07 95842
Do you mean the problem occurs only when steering and loader lift operations occur simultaneously? Or is the loader always weak? ....
Reply to | Quote Reply | Add Photo
YM 3110 Lift
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2004-09-08 95863
It doesn't sound normal. I'd guess it leaks down pretty fast when the tractor is off as well. If that's the case you might turn the flow control valve off and see if that stops the leak-down. On a position control 3ph that would sound like a bad poppet valve or adjustment problem. ....
Reply to | Quote Reply | Add Photo
YM 3110 Lift
paburns
Join Date: Sep 2003 Posts: 3 Westport Tn |
2004-11-02 99689
I would check to see that the valve below the seat in the front is fully open. It is the one with a round knob and is between your feet. It controls the amount of flow to the lift. Just a thought. If it is set too far to the close side it will cause the exhaust to become wet on the top of the muffler. I have the same tractor. ....
Reply to | Quote Reply | Add Photo
YM 3110 Lift
lsheaffer
Join Date: Jun 1999 Posts: 1082 Northern Illinois Pics |
2004-11-05 99852
Sounds to me like a leaking lift cylinder or could be bad control or relief valve. ....
Reply to | Quote Reply | Add Photo
YM 3110 Lift
grsr33
Join Date: Jun 2006 Posts: 1 Doylestown, PA |
2006-06-14 130829
Hello,
Saw your post about the loader problem. May purchase a YM3110 soon. How do you like yours. Where did you get it and how much was it. Was it a newly re-built grey market tractor.
Tell me everything you can about this kind of machine.
Thanks, George ....
Reply to | Quote Reply | Add Photo
YM 3110 Lift
jpmcdaniel
Join Date: Sep 2004 Posts: 2 mississippi |
2006-06-26 131398
Great machine. I fixed the lift cylinder and the tractor hasn't given me a problem since. It was purchased in South Mississippi. I paid $3500.00 for it with a new box blade. It was not rebuilt. The tractor had 1800 hrs. on it, but it had been freshly painted and had four brand new tires. It had been fully serviced with new filters and fuilds. I would buy it again in a heart beat. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This