Go BottomIncrease the lift power
 | mdpinh
Join Date: Feb 2009 Posts: 26 MA 
|
2013-01-03 185840
Hi ,
loader on the L3010 feels week. Is there anyway to
adjust the hydralics to get mmore lift power on the loader.
It has backhoe on it also.
Mark
Reply to |
Quote Reply |
Add PhotoIncrease the lift power
 | taogden
Join Date: Sep 2012 Posts: 81 United States
 Pics
|
2013-01-03 185841
Need to sort issues here. Is it you want to increase the lift capability of your loader. Or is it something is wrong, and it is not lifting as much as it once was?
Has anything changed, hose replacement, etc even plumbing fittings. If there has not been, then you may need to test the pressure of your system, could be the pump. If there have been no change, then it is something in your hydrolic system. The pressure bypass is your only point of adjustment in most systems ....
Reply to |
Quote Reply |
Add PhotoIncrease the lift power
 | kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina 
Pics
|
2013-01-04 185850
I know some who do adjust relief valves but my advice is realize the whole system is built for a certain pressure and you want the relief valve to be the so called weak link and not hoses, cylinders or bucket arms. Do agree with all said above. ....
Reply to |
Quote Reply |
Add PhotoIncrease the lift power
 | Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada
Pics
|
2013-01-06 185878
IMHO, you should never adjust the relief valve without a good pressure gauge in the system first.
A hydraulic system component like a hose or fitting failing under an overload situation rarely ends well.
Best of luck. ....
Reply to |
Quote Reply |
Add PhotoIncrease the lift power
 | Art White
Join Date: Jan 2000 Posts: 6898 Waterville New York
Pics
|
2013-01-06 185882
Murf is right to use a gauge!!!! I've seen a little adjustment give a lot as well as a far lessor gain from a lot of adjustment.
Before you do anything make sure to do a fresh filter and the right oil. Changes in filter as well as oil can make a difference in performance.
We have often found that when people get used to there equipment that what astounded them for performance at delivery time soon is just the normal when people get adjusted to the abilities of a machine. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This