Go BottomL-2850 GST
 | dshadley
Join Date: Nov 2010 Posts: 4 battle creek, mi 
|
2010-11-22 175300
has anybody had problems with 2850 popping out gear 5&6th under load? a little scary on hills!
Reply to |
Quote Reply |
Add PhotoL-2850 GST
 | kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina 
 Pics
|
2010-11-22 175305
Do you have any idea if your linkage is adjusted correctly? Does these two gears use the same shift slot? Could there be trash or such in it to prevent full shifting? ....
Reply to |
Quote Reply |
Add PhotoL-2850 GST
| dshadley
Join Date: Nov 2010 Posts: 4 battle creek, mi
|
2010-11-23 175314
thanks,it had gone through at a tractor repair facility,not kubota.tore it down,checked everything found nothing out of spec,linkege is ok, ....
Reply to |
Quote Reply |
Add PhotoL-2850 GST
 | Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada
Pics
|
2010-11-23 175322
I have heard of this happening on units that don't get much use.
All linkages are ok, and it seems it's related more to how many gears it needs to change at once than anything else. If you go from 2 to 6 directly it happens, if you go to 3, then wait a second, go to 4, wait a second, go to 5, etc., etc., it doesn't seem to happen the same at all. It also seems to be avoided if you go straight to say 6, then after a moment go back down to 5.
I believe the problem is internal to the tractor, not the external linkages.
I do know however that on all our units that got used a lot, it never occurred.
Best of luck. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This