Go BottomI broke my PTO HELP
 | juztyn00
Join Date: Jul 2006 Posts: 2 Mt. Vernon, IL 
|
2006-07-28 132739
I have a 3054 that I've been bushhogging with and it was working fine.. I stopped and took a break, got back on and no PTO. The lever moves into position in both high and low ranges but it does nothing.... no noise... nada... the linkage is in proper working order which leads me to think i broke something more expensive ... service manual that i have fore it was translated rather poorly. Also noticed what sounded like a bad wheel bearing(well, what a bad wheel bearing sounds like on a car) on the right rear as the tractor was moving.. any thoughts?
Reply to |
Quote Reply |
Add PhotoI broke my PTO HELP
 | kthompson
Join Date: Oct 2005 Posts: 5266 South Carolina 
 Pics
|
2006-07-28 132761
I sure don't know your tractor but it sure would seem unlikely the pto broke right when you stopped using it.
Are you sure your pto drive shaft is on the tractor's pto shaft, with the guards that can be hard to tell. If it is try, with the tractor off, turning the tractor pto shaft with it engage and see if it does free spin.
Does your pto shaft have a shear pin that was almost sheared and popped right when you applied load to it?
Hopefully it is something very simple that in your rush of concern you over looked.
....
Reply to |
Quote Reply |
Add PhotoI broke my PTO HELP
| juztyn00
Join Date: Jul 2006 Posts: 2 Mt. Vernon, IL
|
2006-07-29 132786
its something internal. talked to the kioti dealership and the mechanic said it sounded like a broken pto shift fork. Debating if i want to attempt this project with the poorly translated service manual or take it to the dealership. ....
Reply to |
Quote Reply |
Add PhotoI broke my PTO HELP
| OHKI2002
Join Date: May 2007 Posts: 1 OH
|
2007-05-18 142186
Definitely a shift fork.
They are like $15
Not a hard job, need a rear pto gasket also.
You probably need to set the clutch too.
If the shift grinds much at all going in, it needs adjusted.
OHKI ....
Reply to |
Quote Reply |
Add PhotoI broke my PTO HELP
| chrlslovsk
Join Date: Sep 2021 Posts: 1 Texas
|
2021-09-16 200528
Hard to find any diagrams of PtO fork and associated parts. Any idea where to find data? Having same issues. Planning on repairing myself.
Thanks
....
Reply to |
Quote Reply |
Add PhotoI broke my PTO HELP
 | Murf
Join Date: Dec 1999 Posts: 7239 Toronto Area, Ontario, Canada
Pics
|
2021-09-23 200698
The dealer selling you the parts should be happy to share the data from their repair manuals with you, if not contact the manufacturer themselves, most are very accommodating.
Best of luck. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This