Go BottomClutch Adjustment Kioti LK3054
 | Joel
Join Date: Posts: 1 
|
1999-12-11 10893
Does anyone know how to adjust the two stage clutch in a Kioti LK3054 Tractor ?
Reply to |
Quote Reply |
Add PhotoClutch Adjustment Kioti LK3054
| Mike
Join Date: Posts: 1
|
1999-12-20 11325
It takes a special wrench, you can make out of an old 14 mm, to unlock the lock nuts on 3 through bolts on the outside perimeter of the drive clutch pressure plate. With the locknuts released, you can use a socket to adjust the 3 bolts in or out to make the clutch engage sooner or later. Then retighten the locknuts. You can see the bolts thru the inspection plate om the right side of the tractor.
The pressure plate will turn (if out of gear) to see all 3 bolts. You'll see what I mean about the special wrench when you look inside. Cheers, Mike ....
Reply to |
Quote Reply |
Add PhotoClutch Adjustment Kioti LK3054
| WELLSY
Join Date: Nov 2009 Posts: 2 Bermuda
|
2009-11-12 166827
I have a quick question. I have a 3054 which has lost all movement on the clutch pedal. The pedal will not even move an inch. I have disconnected the whole pedal and linkage to eliminate the problem being in the linkage or pedal assembly. The cluth lever itself will not budge. Can someone point me in the right direction with a possible cause and repair procedure. ....
Reply to |
Quote Reply |
Add PhotoClutch Adjustment Kioti LK3054
 | auerbach
Join Date: Sep 2007 Posts: 2168 West of Toronto 
 Pics
|
2009-11-13 166834
Try KiotiClub.com ....
Reply to |
Quote Reply |
Add PhotoClutch Adjustment Kioti LK3054
| Grumpyoldman53
Join Date: May 2021 Posts: 1 Tennessee
|
2021-05-27 200345
|
Quote:
|
Do you have a pic of the wrench you made? ....
Reply to |
Quote Reply |
Add PhotoClutch Adjustment Kioti LK3054
| Stoutimore
Join Date: Sep 2022 Posts: 1 Erath County, Texas
|
2022-09-25 201338
I too am having a problem adjusting the clutch-throwout bearing on a Kioti LK3052 (2-wheel drive version of the LK3054). An earlier poster said:
-----
It takes a special wrench, you can make out of an old 14 mm, to unlock the lock nuts on 3 through bolts on the outside perimeter of the drive clutch pressure plate.With the locknuts released, you can use a socket to adjust the 3 bolts in or out to make the clutch engage sooner or later.Then retighten the locknuts. You can see the bolts thru the inspection plate om the right side of the tractor.The pressure plate will turn (if out of gear) to see all 3 bolts.You will see what I mean about the special wrench when you look inside.Cheers,Mike
-----
On mine, the lock nuts on the adjustment bolts are only 12 mm; the adjustment bolt heads are 14 mm; and there is no way a socket would fit onto the heads of the adjustment bolts because they almost contact the throwout bearing. (This is the gap we are adjusting to mere .000 s of an inch). ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This