Hydraulic problem
Cejma1
Join Date: Sep 2010 Posts: 4 Nova Scotia, Canada |
2010-09-10 173932
I used my 135 massey bushhogging yesterday for about 3 hrs and everything worked fine. Then without any warning, then hydraulics stopped working. It appears that when I move the draft lever, there is no resistance. The hydraulics do not even attempt to move even when reving the engine.
Reply to | Quote Reply | Add Photo
Hydraulic problem
Murf
Join Date: Dec 1999 Posts: 7249 Toronto Area, Ontario, Canada Pics |
2010-09-10 173938
Given your description, I'd say the vibration of the bush hog rattled a bolt loose and the lever is no longer doing anything but sliding back & forth, it's not moving the internal linkage.
Best of luck. ....
Reply to | Quote Reply | Add Photo
Hydraulic problem
Cejma1
Join Date: Sep 2010 Posts: 4 Nova Scotia, Canada |
2010-09-11 173962
I took the right side cover off and the linkage does appear to be moving and engaging the internal mechanism, so it doesn't appear to be a linkage problem.
I also opened the left side cover at the PTO switch lever and checked the filter and it is clean. ....
Reply to | Quote Reply | Add Photo
Hydraulic problem
kthompson
Join Date: Oct 2005 Posts: 5275 South Carolina Pics |
2010-09-11 173969
Does your tractor have the add on remote hyd? If so are you sure you did not bump one of the levers out of where it should be diverting the oil flow away from the lift?
You are sure your oil level is okay also. ....
Reply to | Quote Reply | Add Photo
Hydraulic problem
Cejma1
Join Date: Sep 2010 Posts: 4 Nova Scotia, Canada |
2010-09-12 173974
My tractor does have the remote hydraulic but the lever has been seized due to lack of use, so it did not get bumped... unless somehow it would have moved internally??? ....
Reply to | Quote Reply | Add Photo
Go Top
Share This