
JD 4610 ehydro Problem
![]() | AlbionKen
Join Date: Jul 2003 Posts: 23 Albion, PA and Geneva, OH ![]() |
2003-08-27 62765
I haven't posted a lot to date but just upgraded my membership and will try to contribute more. My issue - I spent a couple of days last week moving and spreading 300 ton of gravel for the driveway I am building. About half way through the tractor stopped moving. The motor was running fine, but it wouldn't go forward or reverse in any of the 3 ehydro ranges. I shut it off and restarted it twice to see if was some kind of electronic error that I might clear, but no luck. I then spent about 30 minutes trying to contact the dealer and set up a service call. Having done that, I returned to the tractor and tried one more time to get it to work. It worked fine! The dealer can't explain it. I checked all fluids and they were fine. Any ideas?
Reply to |


JD 4610 ehydro Problem
![]() | Billy
Join Date: Oct 1999 Posts: 975 Southeast Oklahoma ![]() ![]() |
2003-08-27 62766
Sounds like a controller problem. Tell your dealer to check with JD. They've had numerous problems with bad controllers. Someone explained to me, here while back, it was a software issue of some sort. ....
Reply to |


JD 4610 ehydro Problem
![]() | Billy
Join Date: Oct 1999 Posts: 975 Southeast Oklahoma ![]() ![]() |
2003-08-27 62767
Almost forgot. It should have flashed you a code? ....
Reply to |


JD 4610 ehydro Problem
![]() | Chief
Join Date: Jul 2003 Posts: 4299 Southwest MiddleTennessee ![]() ![]() |
2003-08-27 62768
I agree with Billy, you have a bad controller. Next time this happens watch the malfunction light on the right hand fender. Contact you dealer in the mean time so they can schedule coming out and replacing the controller. Doesn't take long. Nice tractor you got there! ....
Reply to |


JD 4610 ehydro Problem
![]() | jdgreen
Join Date: Jul 2003 Posts: 232 Maryland ![]() |
2003-08-27 62772
There is actually a programming error in some of the controllers. There is a reprogramming procedure the dealer can do with a computer to fix this problem. Tell him to check PIP 03LV077. It addresses intermittent loss of drive. ....
Reply to |


JD 4610 ehydro Problem
![]() | AlbionKen
Join Date: Jul 2003 Posts: 23 Albion, PA and Geneva, OH ![]() |
2003-08-28 62791
I knew you guys would have the answer. What a great resource this site is. It is due for the 50 hour service, so I'll have them change out the controller at the same time. The light did flash, but I couldn't detect any pattern, just flash, flash, flash...
Thanks. ....
Reply to |


JD 4610 ehydro Problem
![]() | Chief
Join Date: Jul 2003 Posts: 4299 Southwest MiddleTennessee ![]() ![]() |
2003-08-28 62808
In some cases problems similar to this can be caused by a faulty sensor the feed the controller. In this case, I would expect the controller. The dealer will check it all out at the 50 hr. service. ....
Reply to |




Share This