2 spool loader controller
tbear640
Join Date: Aug 2014 Posts: 19 Rhodes Michigan |
2019-06-06 198505
What are the considerations when changing a 2 spool joystick controller on my Massey 1428V. Flow rate and ?, are there other factors when exchanging one controller from another. I have access to other 2 spool controllers.
Reply to | Quote Reply | Add Photo
2 spool loader controller
arcwelder
Join Date: Mar 2014 Posts: 111 Florida |
2019-06-17 198562
Gallons per minute should exceed the capacity of the pump at max rpm, open or closed center (most are open center), power beyond if you want to add a control (or just get a 3 spool.)
Your preference for single stick for all controls or dual stick.
pressure relief valve, I found out the hard way just how important this is when a quick release coupler stayed closed. Some controls have pressure relief built in, most do not.
You can look at this stuff at surpluscenter.com.
I added a pressure relief valve on the output of my hydraulic pump. So anything that happens will bleed off at 2000 psi. Also added a directional valve to run my log spliter . ....
Link:
Click Here
 
Reply to | Quote Reply | Add Photo
Go Top
Share This