419 loader
plots
Join Date: Posts: 1 |
2003-02-04 48664
If hooks are installed on this loader will it be able to lift and move 3pt attachments weighting 500lbs or are the hydrolics a little weak on the 790 deere?
Reply to | Quote Reply | Add Photo
419 loader
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2003-02-05 48715
I took a quick tour through the JD site but couldn't find 419 loaders or specs on anything for that matter. I probably just didn't know where to look.
Somebody probably knows the specs and will comment. Overall, I'd be surprised if the loader and tractor hydraulics weren't capable of lifting 500 lbs. Tractor stability is another question, and 790's are pretty light I think. Stability problems can be partially overcome with weight on the 3ph but that doesn't do a lot for stability on side-hills. All told, I expect that somebody who knows the tractor and loader will say that it should handle 500 lbs. OK with acceptable risks
I would keep in mind that lifting loads with chain by small loaders does have its limitations. Wide loads like a rotary cutter may not lift off the ground, or at least lift very high, without it swinging back into the tractor.
....
Reply to | Quote Reply | Add Photo
419 loader
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2003-02-05 48722
I don't find a 419 loader at all. All the specs and the pictures show a Model 70 loader on a 790.
The hydraulic specs(pressure and flow)for the 790 are in the ballpark with the 4110 and the 4210, so maybe that tells us the performance will be similar? ....
Reply to | Quote Reply | Add Photo
419 loader
JAZAK
Join Date: Jul 2003 Posts: 31 COXSACKIE,NY |
2003-02-05 48727
THE 419 LOADER MANUAL FOR MY 790 LIST A LITTLE LESS THAN 500KGS AT 1000 MILLIMETERS LIFT AT 500 MILLIMETERS FORWARD OF THE PIN
IF YOU GIVE A REAL E- MAIL RETURN I'LL COPY THE PAGE TO YOU ....
Reply to | Quote Reply | Add Photo
419 loader
JackHerr
Join Date: Jul 2003 Posts: 46 SE PA |
2003-02-05 48731
My local Deere dealer told me that the 419 has a rated capacity of 610 lbs. It sounded too low to me since the 70 had a capacity of 755 lbs. The Deere info to the dealers could be wrong.
On the plus side, the 419 shares the same attachment QA system as the 410, 420, 430 & 460 loaders. This is great if you need pallet forks, specialty buckets, or bale spear. ....
Reply to | Quote Reply | Add Photo
419 loader
chance
Join Date: Jul 2003 Posts: 4 Sylvania, Georgia |
2003-02-06 48788
Stonehams Implements has a page with the specs. on the 419 Loader on a 790. I ordered mine two days ago, I can't wait until it arrives. Try this link to Stoneham's page:
http://www.stonehams.com/4010seriesloader.html ....
Link:
Click Here
 
Reply to | Quote Reply | Add Photo
419 loader
JAZAK
Join Date: Jul 2003 Posts: 31 COXSACKIE,NY |
2003-02-09 48926
I have a model #SM180P SITREX (italian): 71 INCH,SOLID TIRES,ANTI-SCALPING ROLLER,REAR DISCHARGE,ITS BUILT LIKE A TANK !!! The hubs have grease fittings,the leading edge is re-inforced with 1/2 steel rod and has held up very well. Its a manual ajusting belt driven blade unit that is easy to maintain. I love the rear discharge,it doesn't "clump" wet/damp grass like the side discharge mowers do and I like the wide "stripes". ....
Reply to | Quote Reply | Add Photo
419 loader
JAZAK
Join Date: Jul 2003 Posts: 31 COXSACKIE,NY |
2003-02-09 48928
sorry people, wrong message board,"little ones ya know?!!" ....
Reply to | Quote Reply | Add Photo
Go Top
Share This