Tractorpoint Login

print < Tractorpoint Login

Search for = jdeere

Topic

I am trying to work on my neighbors John Deere 4100. It sat for a couple months this summer. When he went to use it nothing happens when he moves the lever to raise or lower the three point hitch. The front loader and power steering works fine. I played with the rate of drop knob and still nothing. I changed hydraulic fluid and cleaned the screen. The linkage is in tact and the shaft going into the case turns when I move the lever but doesn't seem to have much resistance to it. I took the link arms off to make sure nothing was binding but it wasn't. They are stuck in the up position. I feel that since there is not much resistance on the lever that it is probably something inside but I don't know what to try next. Any help would be greatly appreciated.

John Deere 4100 gear 3 point not workin
John Deere Tractors
Replies 3 Post by Jdeere4210

I'm curious how you make out with the R&R of the clutch, in case I have to remove mine. I'm fortunate, a few of my neighbors work at the local JD dealership..

john deere clutch
Utility Vehicles UTV/ATV
Replies 7 Post by jdeere50

thanks for the input! The stationary sheave measures 11" and the movable sheave @ 8.5". The 18mph clutch is @380.00 ouch! I can run a little slower for awhile.

Diesel gator
Utility Vehicles UTV/ATV
Replies 3 Post by jdeere50

Thanks for the input. I started checking after looking at the manual and wiring diagrams and was chking the voltage on the back of the keyswitch and noticed there was some dirt/residue on the keyswitch and while cleaning it and spraying with WD40 and measuring I heard a relay click (which I think was the fuel cutoff relay) and then everything seemed to be normal (ignition came on, tractor started etc.) While in maintenance mode I serviced the tractor, greased, changed oil etc. and so far no indication of the electrical problem. I don't know at this point if it was the keyswitch or another intermittent problem. I suspect the keyswitch as I was fooling with it when things started working again. Ed

870 electrical problem
John Deere Tractors
Replies 3 Post by jdeere

Deere is doing away with the 210 loader? Or have they just made some changes and are renaming it? I have a 210 loader... works great and installs in minutes.

New 200CX loader for 2210
John Deere Tractors
Replies 7 Post by JDeere2210

Hey Kick,<br>
I notice you have removed the ROP and mounted your flashers on the fenders were the ROP was connected. I have also removed my ROP to allow me to get closer to some trees with low branches while cutting. What was involved in mounting the flashers at that location?<br>
I also like the light set up behind the rear seat. Does that provide adequate light. (what about when you have attachments on?)<br>

Rear Lights on a 2210
John Deere Tractors
Replies 20 Post by JDeere2210

The serial number vs year list that I first saw is in the
JD 870 parts catalog.

870 Model Year
John Deere Tractors
Replies 13 Post by jdeere

Why not have your current tires foam filled. Will save you money compared to buying new complete tires and will do the same thing. .... Just a thought.

solid tires for landpride
Mowers Field and Finish
Replies 6 Post by NJDeere