Go BottomPower Sterring for 226D
 | Bill_R
Join Date: Posts: 1 
|
2002-12-13 46086
I have a 226D 4wd, I have added a loader and it would be nice to have power steering, does anyone know of an aftermarket unit, or someting that will fit.
Reply to |
Quote Reply |
Add PhotoPower Sterring for 226D
| Jesse Solis
Join Date: Posts: 1
|
2002-12-17 46220
Bill, have you received any information as I also have the same yanmar and my considering adding power steering.
Thanks,
Jesse ....
Reply to |
Quote Reply |
Add PhotoPower Sterring for 226D
| Bill R
Join Date: Posts: 1
|
2002-12-17 46230
No I havent heard anything. I would think some kind of clamp on cylinder that would connect to the tie rod would work, but dont know where to find one. ....
Reply to |
Quote Reply |
Add PhotoPower Sterring for 226D
| TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley 
|
2002-12-18 46245
You might check on one of the antique tractor sites. Some people convert older farm tractors to PS but I can't recall if any of the discussions mentioned store-bought conversions. There also was a discussion here awhile back.
A hydraulics shop probably could rig something up, but there would be a bunch of design issues and poor design might be unsafe or simply ruin a front end. I believe Art commented that such conversions may lower a tractor's resale value.
....
Reply to |
Quote Reply |
Add PhotoPower Sterring for 226D
 | marklugo
Join Date: Jul 2003 Posts: 281 Tifton, GA
 Pics
|
2002-12-18 46254
Some loader companies offer conversions. Kelly loaders used to offer some kits for the chinese tractors using a corvette steering cylinder and plumbing a flow control valve into the hydraulic line. It can do a lot for your tennis elbow. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This