Go Bottom Go Bottom

240 Massey

View my Photos
Jdb12345
Join Date: Oct 2016
Posts: 2 McDonough GA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-10-28          195914

I have a new to me 240 Massey. 94 model will start by jumping the solenoid on the starter. What things should I look for. Runs good after starting. Any idea's would be great.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



240 Massey

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-11-01          195922

I would start looking to see if the ignition switch is providing power out. Then check to see if the Neutral Safety switch is operating. It could be out of adjustment or just not working. Some tractors the switch makes the circuit contact, others have to be open. On another page I found:
Search yahoo for 'massey 240 neutral safety switch check'
The wiring runs through the PTO safety switch through Neutral safety switch then to the starter.
JACUSTOMER-kjsn232c- :

"Hey Curtis, figured it out. Found the wire running from the solenoid went through the PTO switch and then through the neutral safety switch to the ignition switch. The safety switch at the PTO is where the problem is at. Didn't have a wiring diagram,but I figured it out. I've ordered a new switch. Sorry my first tractor. Thanks for your help."
....


Link:   Massey 240 Wiring Diagram

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



240 Massey

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2016-11-01          195923

Click on Manuals, Massey Ferguson, scroll down to 240
I think this is the Owners and Service manuals.
not free, but if you wanted to buy ....


Link:   

Click Here


 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login