Go Bottom Go Bottom

JD 420 loader toothbar

View my Photos
jpwazz
Join Date: Jun 2004
Posts: 7 Boardman,WI
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2014-10-02          191147

My 420 loader bucket cutting edge is 3/4" thick. For the width that I need, 59 1/2", all of the toothbars that I see are manufactured for a bucket with a cutting edge no more than 5/8" thick so the toothbar would not fully engage the front of the bucket. Does anybody use one of these on thier loader or is there a toothbar that I have missed out there made for a thicker edge?

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



JD 420 loader toothbar

View my Photos
harvey
Join Date: Sep 2000
Posts: 1550 Moravia, NY
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2014-10-06          191174

Looks like someone added a different cutting edge. My factory is thinner attached to bucket.

Best bet would be modify the tooth bar to fit. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login