Go Bottom Go Bottom

Soft Edge for 410 Loader

View my Photos
92gt5ohRed
Join Date: Jun 2004
Posts: 10 Southeast PA
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2005-11-26          119857

Last year I used my FEL for snow removal on my driveway, about 500 feet of pavement. What I noticed was the steel edge did a nice job of scraping and scratching the pavement. This year I am determined to make that knofe edge a soft edge. Has anyone done that and any suggestions? I went to a local tractor supply co (TSC) but I did not see anything that would be good to fabricate from. Any tips would be appreciated.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Soft Edge for 410 Loader

View my Photos
Chief
Join Date: Jul 2003
Posts: 4297 Southwest MiddleTennessee
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2005-11-26          119863

Here is a thread that addresses a very similar situation. Hopefully this will give you some good ideas. ....


Link:   Soft edge for rear blade?

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login