Go BottomPTO Driveline Lubricant
 | Mike1819
Join Date: Oct 2003 Posts: 56 OHIO 
 Pics
|
2005-04-07 109565
What is the best lubricant to use on the PTO driveline?
Reply to |
Quote Reply |
Add PhotoPTO Driveline Lubricant
 | harvey
Join Date: Sep 2000 Posts: 1551 Moravia, NY 
Pics
|
2005-04-08 109572
Grease! ....
Reply to |
Quote Reply |
Add PhotoPTO Driveline Lubricant
 | BrendonN
Join Date: May 2004 Posts: 89 Central Kansas
|
2005-04-08 109575
Pretty much any good quality gun grease would do the job for both the u-joint crosses and slip tube. I also like to put a dab of grease on the PTO shaft splines before hooking up. ....
Reply to |
Quote Reply |
Add PhotoPTO Driveline Lubricant
| oliver28472
Join Date: Dec 2003 Posts: 7 Mt. Ulla, NC
|
2005-04-08 109582
I have been using lockease on the splines and push button on the hookup yoke. Lockease is spray graphite. I have used it for years. It does not attract dirt/dust like grease does. I do use grease in the joints and in the slide. ....
Reply to |
Quote Reply |
Add PhotoPTO Driveline Lubricant
 | Iowafun
Join Date: Jul 2004 Posts: 955 Central Iowa 
Pics
|
2005-04-08 109586
On older equipment, it's not a bad idea to take the PTO shaft apart (just pull the one shaft out of the other). That way you can clean up the old grease and any debris that may have gotten in there. I did that with a manure spreader I borrowed. I shoved the male shaft in two or three times while cleaning it in between. It removed dirt and ancient grease. I thn applied a fresh coat of general grease and it works much better now. ....
Reply to |
Quote Reply |
Add PhotoPTO Driveline Lubricant
| Iowafun
Join Date: Jul 2004 Posts: 955 Central Iowa
Pics
|
2005-04-08 109587
On older equipment, it's not a bad idea to take the PTO shaft apart (just pull the one shaft out of the other). That way you can clean up the old grease and any debris that may have gotten in there. I did that with a manure spreader I borrowed. I shoved the male shaft in two or three times while cleaning it in between. It removed dirt and ancient grease. I thn applied a fresh coat of general grease and it works much better now. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This