Go Bottom4300 Throttle
 | TreeFarmer
Join Date: Jul 2003 Posts: 4 Greenville, MI 
|
2003-06-13 57517
My 4300 throttle has a nasty habit of decreasing or slowing down when I am trying to mow at PTO speed. Evidently something in the throttle linkage is lost. I set it and take off and it slowly decreases.
Anyone else have a problem with theirs, and what was the fix?
Reply to |
Quote Reply |
Add Photo4300 Throttle
| TreeFarmer
Join Date: Jul 2003 Posts: 4 Greenville, MI
|
2003-06-13 57518
Oops, didn't mean lost, should have read: loose ....
Reply to |
Quote Reply |
Add Photo4300 Throttle
 | Billy
Join Date: Oct 1999 Posts: 975 Southeast Oklahoma 
 Pics
|
2003-06-13 57521
You're right, something is loose. I wish I could tell you where it is on your tractor but I can't. I had the same problem on a 4610 but it was taken care of under warranty. If my memory serves me right (doubtful) it was some kind of restriction plate. Easy fix, if someone here can tell you where it is? ....
Reply to |
Quote Reply |
Add Photo4300 Throttle
 | Chief
Join Date: Jul 2003 Posts: 4297 Southwest MiddleTennessee 
Pics
|
2003-06-13 57530
Easy fix Treefarmer. Up under the dash area where the throttle lever is there is a friction adjustment screw/bolt. Tighten is a little and adjust it as required to hold rpm. I am assuming you have the HST version? ....
Reply to |
Quote Reply |
Add Photo4300 Throttle
| TreeFarmer
Join Date: Jul 2003 Posts: 4 Greenville, MI
|
2003-06-13 57532
Great, thanks. I'll check it out. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This