Go Bottom Go Bottom

pc20-6

View my Photos
anocomp0219
Join Date: Sep 2007
Posts: 10 NH
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-05-11          153613

looking for rod bearing torque specs,engine is a yanmar 3D84-1FA

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



pc20-6

View my Photos
candoarms
Join Date: Mar 2007
Posts: 1932 North Dakota
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2008-05-11          153616

Anocomp0219,

It's very likely that you'll also need the torque specs and tightening sequence pattern for the head bolts.

There are probably quite a few other bits of information that you'll need in order to properly reassemble the engine.

You might look into purchasing a service manual for your tractor, or at least one that is nearest to your tractor.

See the link below.

Joel
....


Link:   Hoye Tractor -- Yanmar Service Manuals

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



pc20-6

View my Photos
anocomp0219
Join Date: Sep 2007
Posts: 10 NH
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2008-05-11          153618

I HAVE A SHOP MANUAL ONLY COVERS BASIC PARTS REMOVAL AND INSALLATION HAVE MOTOR READY TO RUN MINUS THE ROD TORQUE OIL AND OIL PAN TRYING TO FINISH TODAY NOT MUCH TIME DURING THE WEEK ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login