Go BottomHelp Identifying Metal Siding
 | erieshores
Join Date: Jun 2015 Posts: 2 Cleveland 
|
2015-06-03 192887
I need some help identifying a manufacturer or source for some more of the metal siding that has two ribs about 5" apart and then an 8" flat section, then two ribs about 5" and repeat. We want to add onto the barn and would like the siding to match, but are not able to find out who made the siding.
Reply to |
Quote Reply |
Add PhotoHelp Identifying Metal Siding
 | greyhorse
Join Date: Jun 2013 Posts: 65
 Pics
|
2015-06-05 192889
I think you will be best off taking a pix or sample of a piece to a supplier to see if you can get a match ....
Picture Link
Reply to |
Quote Reply |
Add PhotoHelp Identifying Metal Siding
 | kthompson
Join Date: Oct 2005 Posts: 5278 South Carolina 
Pics
|
2015-06-05 192892
My guess is you are looking at a common design at least "here". "Here" is important for I think a lot of that type of metal is formed somewhat locally from roll much like they do gutters now as they will make it to the length you want. I know on my barn the metal came from two different sources but I bought from same dealer and they matched perfectly. ....
Reply to |
Quote Reply |
Add Photo
Go Top
Share This