Go Bottom Go Bottom

GC2300 bit the dust

View my Photos
Gentleben
Join Date: Sep 2017
Posts: 9 Houston, tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-09-11          197067

We have had this little massey Ferguson tractor for aboutt 13 yrs , it has been used and abused ,very little if any pm at all. well now it has stopped , quit would not move and lost all hydraulics so my son calls and says little tractor is not working so i go get it and true it has given up the ghost .I TIED THE BRUSHOG TO A TREE IN MY BACK YARD AND DRUG THE TRAILER OUT FROM UNDER NEATH THE HOG.
I THEN STaRTED THE little guy up and he went forward so i reversed him and drove him off the trailer . BUCKET WOULD NOT WOR K . I THEN DISCONNECYTED THE BUCKET AND STARTED LOOKING FOR THE PROBLEM AND TAH TIS WHERE I AM AT NWO .
has anyone heere had the same issue and if so how did you repair it.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GC2300 bit the dust

View my Photos
arcwelder
Join Date: Mar 2014
Posts: 111 Florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-09-13          197076

On my 1240 the hydraulic lines for the front end loader go under the tractor to a hydraulic adapter. this adapter has 2 hoses on it. if either gets disconnected, the hydraulics stop working, including the Front End Loader and the 3 point hitch. You may have one disconnected or a line cut.
if the line is cut or leading, you probably do not have any oil in the Transmission. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GC2300 bit the dust

View my Photos
Gentleben
Join Date: Sep 2017
Posts: 9 Houston, tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-09-13          197078

Thanks for your response after a few weeks of trouble shooting in my spare time i have came to the conclusion that my problem is the gear oil pump, what i call te accesory pump. the shaft splines are worn out so now it is a matter do i replace the drive gear only or do i replace the whole pump at the price of 439$ not sure of availability of gear shaft ;-)
....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GC2300 bit the dust

View my Photos
Gentleben
Join Date: Sep 2017
Posts: 9 Houston, tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-09-13          197079

GC2300 Hydraulic gera pump ....

Picture Link
Massey Ferguson Tractors GC2300 bit the dust
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GC2300 bit the dust

View my Photos
lsheaffer
Join Date: Jun 1999
Posts: 1082 Northern Illinois
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2017-09-16          197090

the pumps usually are not rebuildable. Send me the writing from the pump end plate & I should b able to get you a pump for a lower price than Massey. I can be reached at parts at sheaftractor.net ....


Link:   japanese tractorparts

 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



GC2300 bit the dust

View my Photos
Gentleben
Join Date: Sep 2017
Posts: 9 Houston, tx
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2017-09-20          197113

Great the pump is Shimadzu 360 GPY-10R708
Thank you lsheaffer for your willingness to want to help, is the gear in the transmission usually ok??
GB ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login