Go Bottom Go Bottom

Kubota L4310 HST

View my Photos
VaOrange
Join Date: Mar 2011
Posts: 4 Virginia
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-03-05          177197

Hey Folks,

I just purchased a Kubota L4310 HST primarily for mowing and bushhogging. I was wondering if you folks could tell me if the HST will handle a 2 bottom plow? Thanks.


Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Kubota L4310 HST

View my Photos
billtreat
Join Date: Oct 2011
Posts: 21 los alamos calif
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2011-10-14          180896

it should, I have an L3410 4x4 and it does just fine. I recently made a rake for the thing, 2in apart for the tines, just to clear rock,bushes,weeds,logs and whatever. I can lift 150, 200 lbs and want no part of this thing, it is heavy, tractor does just fine with the bucket. Only go in the ground about 2in not a ripper. the tines are 2 1/2 by 3/4 flat cut at 52 degs angle should have been 60 so the junk goes in the bucket and hard faced. A gal gave me the hard facing, so i used it. about $400.00, stoody brand name, does just what i want. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login