Tractorpoint Login

print < Tractorpoint Login

Search for =

Topic

I have an L3410 3pt lift on it, make your own mount to the fram, i did 3pt only lifts it, the mount prevents it from moving back and forth no slop. Works fine with a hoe. Is not a quick on and off item.

Backhoe options for Kubota L3010
Kubota Tractors
Replies 27 Post by billtreat

I have an L3410 with a inverter on it mounted over the engine cover. It ran down the battery so I added another battery. Works fine. Put on the largest you can, you may use it for something else.

Inverter Installation On A L3240 Kubota
Kubota Tractors
Replies 9 Post by billtreat

filter it it works. Use an automotive type for diesel. dont worry about the price if you dont use that much.

OFF ROAD DIESEL FUEL
Parts and Repair
Replies 27 Post by billtreat

I have an L3410 real happy with it. Cadillac of the tractors, Loader, Gannon box, Back hoe attach., mower pto, Disc, Roto tiller, Post hole attach., Ring roller. I get $55.00 per hour for it and me two, 2 hour minimum. Made A stabilizer for it for the back hoe, holds no weight and no lift. If you get stuck use the bucket to back out, it will push, use the wheels in reverse two. Dont use two many rippers at one time, has to do with psi. Bought the tractor when it had 125 hours now have 537. Use a water filter and a by pass oil filter it helps. Do not let the dealer add hydraulic fluid unless it is filtered first, just because it is new does not mean it is clean. I added dumbell weights on the tiller, it helps, hard facing on the runners two. You can add rotors, clutch, disc or something else from a truck for weight. I shift without the clutch . Made a hydraulic system for the rippers, got tired of always having to engage them. Added tubes to the front tires to prevent them from blowing off on hill sides using the bucket. Made a roll cage with side curtains, got tired of being hit in the face with poison oak and branches. Also added a place for beer, water that is, toilet paper too for those special occasions. On bottom of the bucket was added a 5 inch wide center section from a John Deer cat to prevent wear and U shaping of the bucket. Added a 2x2 square tubing to the top of the bucket for strength and hooks. It works. Also a horn, back up alarm, lights, fan, radio were also added.
But i dont have a pink brass strippers poll, yet that is. Have fun.

Kubota
Kubota Tractors
Replies 6 Post by billtreat

put a coolant filter on the water line it helps.

Shibaura SD1500B Water Pump
Shibaura
Replies 21 Post by billtreat

I have a L3410 and it does just fine with a 3pt backhoe on it, it goes to the frame for support. Be careful with the bucket it can be bent. Think about adding a 2x2piece of steel on top of it for support. Be sure to cut the roots. Just takes time. Dont hurry.

Kubota L3200 Tractor Stump Removal
Kubota Tractors
Replies 18 Post by billtreat

I have an L3410,575hrs on it, was working on a hill side and blew the front tire put in a tube prob. solved. Made a rake for it myself,bought a backhoe it was worn out he said it was ready to work,never should have listened to that guy, fixed everything, ok know. In the process of installing a coolant filter, then a bypass oil filter.

Kubota L3800 review
Kubota Tractors
Replies 7 Post by billtreat

brendan Cassy;hydraulic genus said it all just because the oil is new does not mean it is clean, filter it, and change the filter.

How to Flush Tractor Hydraulic Fluid
Kubota Tractors
Replies 5 Post by billtreat

try baldwin they may have a cross and it may fit

Kubota B7500 Oil filter cross reference
Kubota Tractors
Replies 21 Post by billtreat

be sure to filter the new oil just because it is new does not mean it is clean. ask brendan casey on e mail about it.

KUBOTA B8200 SLOW HYDRAULICS
Kubota Tractors
Replies 8 Post by billtreat

it should, I have an L3410 4x4 and it does just fine. I recently made a rake for the thing, 2in apart for the tines, just to clear rock,bushes,weeds,logs and whatever. I can lift 150, 200 lbs and want no part of this thing, it is heavy, tractor does just fine with the bucket. Only go in the ground about 2in not a ripper. the tines are 2 1/2 by 3/4 flat cut at 52 degs angle should have been 60 so the junk goes in the bucket and hard faced. A gal gave me the hard facing, so i used it. about $400.00, stoody brand name, does just what i want.

Kubota L4310 HST
Kubota Tractors
Replies 2 Post by billtreat

I have an L3410, about 1999. 567 hrs,put a used hoe on it, added a brace that goes to the frame, does not hold any weight, just to stabilize the thing, made it myself, goes under and do not use the mid point attach mower. John Deer makes them for theirs for about $1000.00. Not sure how fast the attach is, do not care all material bought at scrap place.

Kubota L3010 Back Hoe Sub frame easy on off
Kubota Tractors
Replies 2 Post by billtreat

buy the largest unit your tractor can use , lot of people go small ,mistake.
woods is good, I bought a used one, he said it was ready to be used, not so, it was bent and he was allergic to grease, worn out, i took out every weld he did, it cost me 300.00 to rebuild the thing, my mistake for believing him. All the pins and bushings to, a lesson well learned. Do not trust any one. The bad thing, I knew him. I have an L3410, and many implements.

Backhoe for Kubota B3030
Kubota Tractors
Replies 3 Post by billtreat

thought about it and do not want to pick up the weight,but it would add weight to the back.

How to build a Front End Loader Snow Blade
Snowblowers / Snow Plows
Replies 62 Post by billtreat

I have a kobota L3410 that does the same thing found out it will not shut off unless the battery is charged.

John Deere 790 cannot turn off
John Deere Tractors
Replies 10 Post by billtreat

i have an L3410 kubota run it at 3500rpm all the time. 550 hrs.,no smoke. have

many implements.

Kubota B6000E Smokie Exhaust
Kubota Tractors
Replies 19 Post by billtreat