Go Bottom Go Bottom

John Deere 1070 will not go in gear

View my Photos
tonynales
Join Date: Oct 2013
Posts: 3 florida
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2013-10-01          188058

I have a 1070 1997 JD tractor The tractor will not go into gear when placed in either high or low gear makes that grinding sound . also it cuts off when I engage pto third the 3 point hitch is stuck on up wont go up or down

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



John Deere 1070 will not go in gear

View my Photos
greg_g
Join Date: Jan 2004
Posts: 1816 Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2013-10-03          188062

When combined with your other post, it sounds like you bought a used tractor despite the fact it had these problems. A 1997 JD1070 will likely be a hydrostat machine, so the "gear" issue you describe is most likely the range select lever. Should be a High and a Low at minimum, perhaps a Mid in between. It's not a shift-on-the-fly mechanism, the tractor has to be completely stopped when first attempting the shift between ranges. Helps to have a foot on the brakes as well.

As I stated in the other post, more info is needed regarding the rear lift arms.

//greg// ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login