Go Bottom Go Bottom

Farm pro 2420 solenoid

View my Photos
cmitchell
Join Date: Apr 2010
Posts: 2 Indiana
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-04-28          170405

I hope someone can help me out. I just bought a used 2420 farm pro 20h tractor. The solenoid is going out and I've been trying to find a replacement for it. The starter is fine, it just takes about 10-15 tries before that solenoid kicks in and turns. I found a farm pro site, but that was a lost cause, they have everything but a solenoid or a starter. None of the local auto stores have anything either. Would appreciate any information on where to find parts for this thing.

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Farm pro 2420 solenoid

View my Photos
greg_g
Join Date: Jan 2004
Posts: 1816 Western Kentucky
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-04-28          170416

If it's the QD100C3 starter, you might not actually need a new solenoid. That series of tractor has a chronic problem of voltage loss through the wiring harness. The solenoid needs a minimum of 10v from the keyswitch to kick the pinion gear all the way to the point of engagement with the ring gear. 8v-9v is a hit an miss proposition, which accounts for the "spin-whirr-try again" issue. Less than that, and it just clicks.

Voltage can only be measured while the starter is actually cranking, so it's really a two man job. If you don't have a digital multimeter, you can try jumping with a screwdriver (bypasses the keyswitch and associated wiring). The usual fix is to add a Ford type starter relay between the keyswitch and the solenoid. Easy and inexpensive fix.

//greg// ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Farm pro 2420 solenoid

View my Photos
tomzah
Join Date: Apr 2010
Posts: 8 Cincinnati, Ohio
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster

2010-05-08          170636

I just bought the same tractor (my first)last week. I understand your frustration but believe me the help on this forum is great. Click the link..

I just put an order in to these guys and they are tops ....


Link:   

Click Here


 
Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo



Farm pro 2420 solenoid

View my Photos
affordable
Join Date: Sep 2004
Posts: 93 Bellville,Texas
TractorPoint Premium Member -- 5 Tractors = Very Frequent Poster  View my Photos  Pics

2010-05-12          170722

Yes we have the solenoids,sorry for the late response,I don't check this board as much as some of the others.

We should have any parts you will every need for your tractor,it's the same as the Jinma 200 series

Thanks
Tommy



Moderator edited to remove the advertising content. ....

Reply to | Quote Post Reply to PostQuote Reply | Add PhotoAdd Photo


  Go Top Go Top

Share This
Share This







Member Login