Go BottomCub Cadet Hydralics
 | Ken H.
Join Date: Posts: 1 
|
2004-06-10 88265
My Cub Cadet 7205 has developed a problem with the catagory I hitch. It raises and lowers as it should with the exception that it will not go all the way down. It does go all the way up. When in the full down position the lift arms are parallel with the ground instead of pointing toward the ground. They do not go low enough to attach the implements. Any suggestions?
Reply to |
Quote Reply |
Add PhotoCub Cadet Hydralics
| Tom
Join Date: Posts: 1
|
2004-06-14 88482
sounds silly, but does it have the correct hydraulic fluid and the proper amount? ....
Reply to |
Quote Reply |
Add PhotoCub Cadet Hydralics
| mushing_madness
Join Date: Dec 2003 Posts: 23 Southeast Minnesota
|
2004-06-14 88509
I had the same problem on my 7305. There is a thread already started on 3-PT problem on a cub cadet. Here is the link to the thread - http://tractorpoint.com/cgi-bin/tractor/fullThread.pl?parentnum=86449&catcode=CUB&catname=Cub%20Cadet. It has to do with sticky linkages. I cleaned/lubed mine up and the problem went away and has never been back. I periodically (once a year) lube up the linkages to make sure that they don't start sticking again. ....
Link: 3-PT Problem on Cat 1 hitch
Reply to |
Quote Reply |
Add Photo
Go Top
Share This