Tractorpoint Search for

tractorpoint.com - The leader in Tractors from Compacts, to Utility, to Full Size Tractors! Kubota, John Deere, New Holland, Kioti, Case/IH, and Others. Keywords=Compact Tractor, Kubota Tractors, Kioti Tractors, JD, John Deere Tractors, New Holland, Case Boomer, Used Tractors, Classifieds, Dealer Directory, Tractor Pictures / Images

parts | discussion | photos | podcast | reviews | specs | dealers | classifieds | contact | faq | myProfile | home Login Now | Sign Up

Search for =

Topic

The model sounds like a perfect match for you. The 3-point hitch limitation statement on the 2210 is pretty much a disclaimer. The arms are just as long as it big brothers in the small frame 4X1X class, and the width of spread accommodates almost any standrd 3-point implements. No need to buy sub-compact stuff, except possibly a PHD. I ran a standard 48" boxblade, Befco broadcaster, 25 gallon sprayer, Turfco aerator, a 6-foot scraper blade--all with standard Category 1 pin placements with no problems. It's just a little shorter (height) with a limted lift height compared to the bigger tractors. You will want to have the dealer toss in some form of rear ballast such as a ballast box, or better yet, a 48" box blade. Can't really comment on the price, but it is a very capable landscaper and a great mower. See pic for loader capability testamonial:

JD 2210
John Deere Tractors
Replies 9 Post by bigpete

A slightly different view showing the frame, scarifier beam, and my thumb <8~)

Box Blade Selection
John Deere Tractors
Replies 10 Post by bigpete

Now that's a great observation. I'm 5' 9" and felt I needed to watch my head when I tested the BX2300/23. I think that guy might be 5'4", at the most

Smallest and cheapest TLB for JD
John Deere Tractors
Replies 13 Post by bigpete

Can you rent or borrow a trailer? Moving the payload off a lower trailer will be much safer and more practical. Either way, I think my insticts would be to slide them into the loader bucket as far as possible and use chains and the center hook to secure the top end of the load. And yes, you will need a 400-500 pounds of ballast at a minimum. Good luck

Need Advice
John Deere Tractors
Replies 22 Post by bigpete

Hey, Chris. The 2210 has a floorboard dial for mower deck height comtrol, versus a set of shackles above the 3PH on the 4110/4115. I do like the 60" deck on my 4110 a bit better than the 62C, but I give up a couple of inches for a heavier deck. Both the 2210 and 4110 will mow in light cutting conditions at 6-8 MPH, but 5-7 MPH is a better speed. The turning radius is almost idential between the 2210 and 4110, but I beleive the 2210 is a bit easier on the turf in those routine tight turns around trees. The 3PH on the 2210 is wide enough for most any standard ASAE Cat 1 implement, but I think you would need a post-hole digger with a shorter auger for transport. Never used one, but that's what I've read. I'm looking at a pro-quality 48-52" walk-behind with standing sulke for my trim work. I figure it is going to cost me anywhgere from $2,500 to $4,000 for the addition.

Anyone own a 4115 with 72 mmm
John Deere Tractors
Replies 18 Post by bigpete

That's more than just a great price. That's a GREAT price. Hope you keep your sister-in-law on the Xmas card list.

Just bought a JD 4100 HST
John Deere Tractors
Replies 7 Post by bigpete

Well, if you have already made the purchase then I'd say it was the right decision <:^)...don't look back. It won't do you any good. If you are trying to decide, make sure you know all the details of what is covered and what is not. To put it in gambling terms, basically, you are betting $800 that your machine will have a problem before 2008 and that the problem will cost more than the bet. I've had extended warrantys that were bad bets, and a couple that were good bets. If you don't want the worry, make your bet and take your chances. If you try to sell the tractor on the open market before the extended warranty is up, it's a great selling point. However, dealers will not likely increase your trade-in allowance because you have the extended warranty. Good luck--Pete

Extended Warranty 2210
John Deere Tractors
Replies 5 Post by bigpete

There isn't much out there in the way of PTO spreaders that are designed to spread wet sand. I don't think anybody here is looking for that level of spreader.

Using PTO seed spreader for sand salt
John Deere Tractors
Replies 16 Post by bigpete

You're not one of those Powerball lottery winners, are you? Sounds like a good move to me...

Man I love this place
John Deere Tractors
Replies 7 Post by bigpete

My dealer was smart enought to say he didn't know the best way to fabricate bucket hooks, but said he had a top notch technician/machinist who did. It never seemed like a big deal to the shop tech. You might try talking to someone back in the shop if you can. If your dealer can't handle the job there is most likely a machine shop or welding shop that can do the work for under $100. Good luck. Edit: Forgot to mention that the charge on my work was part of my negotiation. It showed as a $60 shop fee and a $60 credit. I did pay materials and I think that was less than $20 including the hooks, plate for the gussets, and paint.

Chain Hooks
John Deere Tractors
Replies 17 Post by bigpete

You're welcome, but I picked up the tip from Ducati.

Check the battery compartment on your Deere 4000 series CUT REGULARLY
John Deere Tractors
Replies 11 Post by bigpete

She should have known better. I bet she won't forget if you have her sweep out your shop and shed for a few months. Yeah, that's what I would do to drive home the point. Let us know how that goes for you...

4110 Ignition Key
John Deere Tractors
Replies 15 Post by bigpete

I'm running a 60" behind my 4110. As mentioned, the 48" doesn't cover tracks. The perfect size is 54" for this tractor, but there are only a few companies that make that width. Of the 54"-ers I found, most were designed for industrial and construction use, very HD, and equally expensive. I'm happy with the 60" and just make sure I take a slightly smaller bite and chew a little more slowly. Pete

What size box blade for 4110
John Deere Tractors
Replies 6 Post by bigpete

Yup. I used the diplomatic and persistant method, put everything in writing at the right stages, and ended up a satisfied Deere customer. Maybe some have not, but all it took was a little patience and a little more time. It doesn't matter whether it's JD or the one with the punkin' colored paint.

Orange is one of my favorite fall colors, but I like green year round <;~}

Extremely disappointed in Deere
John Deere Tractors
Replies 38 Post by bigpete

I'm a Deere fan and would recommend the 2210 for a variety of reasons. However, my gut instinct doesn't give the 2210 any stability advantage on hills over the BX. Maybe more to this story. Maybe a dealer issue, too. Regardless, if stability is the problem and mowing is the primary chore, a Steiner, Ventrac or Power-trac sounds like an even better choice than a SCUT. You can get all kinds of great implements for those articulated tractors for most estate work. Pete

Very Impressed w 2210
John Deere Tractors
Replies 25 Post by bigpete

Hi, mykeln. When I had my 2210, I thought the 49" bucket was the right choice. It covered my wheel stance width. I did quite a bit of digging and moving rock, so it was the right size, The advantages of the 53" are the ability to work closer to building and objects plus, of course, increased volume in the bucket. Recommended if you are going to move lots of lighter materials or soil. I agree 100% on the recommendation to get the larger deck unles it won't fit between something on your property. The ability to trim closer to trees, fences etc., make the extra $ worth it. Not to mention the faster cut of larger areas. Pete

2210 w 49 quot FEL 54 quot MMM R4
John Deere Tractors
Replies 3 Post by bigpete

I don't think Ralph said he was running fluid in the front tires. He was addressing the issue/question about rear ballast as it might relate to steering effort with a load on the front end. No "Duh"s necessary if you read the thread back a page, or so.

problem with 4115
John Deere Tractors
Replies 18 Post by bigpete

Just stumbled upon your message. Try Precise Engine repair. Plenty of parts listed on the site. Link below....If you don't see it on the site, give Bruce a call. Great small company to work with. A rare source for Onan parts. Pete

Onan ignition coil
Shop Tools
Replies 4 Post by bigpete

Hey, Iowafun. Smart move getting those dogs out of the wallows before filling them in... Congrats. Sounds like quite a few stories of post-purchase frustration but with a happy ending. I have alway marveled at the difference between the tractor industry and the auto industry for new machine sales. Buy a new car and you typically have in prepped and ready within a couple of days, even if the car has to come from another dealer. I suppose the difference is based in the fact that tractor buyers really do have so many choices to make, and so many add-ons available. I think most inventory out there is pretty baseline for the model. Probably even more so for a tractor your size. That's no excuse for the dealer ordering the wrong part number or for the parts network to move that slowly, whichever was the real cause.

Which county are you in in the Tall Corn State. I was raised in Story County, the son of a former JD engineer. Go Hawks or'Clones, whichever your preference... Pete

WTF - ARGH
John Deere Tractors
Replies 13 Post by bigpete

I grew up using gear tractors and have to make a concious effort to actually back off the hydro pedal when starting to reach pushing or pulling limits. This directs more torque to the wheels through the drivetrain. It's the opposite of the logic we are used to when using throttles on cars, etc. Also, if the 4110 was not in low range, you'll find the pushing limit before you run out of traction. You probably know all this, so apologies if I'm preaching to the experienced. With my ballasted 4110 in low range 4WD, I typically run out of traction before stalling the machine. Just a few thoughts. --Pete

4110 Noise
John Deere Tractors
Replies 7 Post by bigpete